Porsche Boxster 986 Suspension Upgrades 1997 to 2004

Porsche Boxster 986 - Suspension Upgrades - 1997 to 2004

  • Spring Caps All Coil Over Applications & Billet Top Mounts GT3 RS 944 & 968 M030

    SKU:17128

    In Stock In Stock
    On applications using Adjustable Camber Plates Front & Rear. With spring ID of 62mm 2 1/4" using Spring Top Hats. Sold as a set of two. For all Spax & Bilstein B9 & B12 for 964 993 996 & 977 Turbo, GT3, RS. 924/944/968 M030. Boxster & Cayman R / GT4 etc
    £119.99 inc VAT £99.99 ex VAT
  • Fuel Sender Unit 924 / 944 -85

    SKU:00408

    3-5 Days 3-5 Days
    Set of four original sports springs, lowers car by 10mm , For All Models 2,5 / 2.7 & Boxster S
    £329.87 inc VAT £274.89 ex VAT
  • H&R Anti Roll (Sway) Bars Front & Rear Boxster / Cayman All

    SKU:5532

    3-5 Days 3-5 Days
    Front 26mm & Rear 22mm Diameter , Reduces Body Roll, Increases lateral stiffness, Improves handling. An exact fit & incomparable performance in every application. Heat-treated & shot-peened for increased hardness & life, Powder coated. Comes with Teflon composite bushings. For All Models
    £470.22 inc VAT £391.85 ex VAT
  • Stomski Racing Rear Adjustable Toe Link Kit All Models 1997-2012

    SKU:AP997240

    In Stock In Stock
    Stomski Racing Motorsport quality Billet Alloy & rose Jointed Toe Arms. Adjust your camber & re dial in the rear toe. These adjustable links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely by allowing you to keep the arms parallel. Fits all Models inc GT3 RS, Cup & Turbo models 1997 -2012
    £462.00 inc VAT £385.00 ex VAT
  • GT3 CUP / RSR ADJUSTABLE CASTOR THRUST BUSH FOR COFFIN ARM

    SKU:SR087

    3-5 Days 3-5 Days
    Whether doing a complete suspension upgrade, eliminating the overly-compliant rubber thrust arm bushings that lead to unpredictable camber changes, or searching for more range of adjustment for your suspension, STOMSKI RACING's Adjustable Thrust Arm Bushings are the answer to your needs.  Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver.  By upgrading to STOMSKI RACING's Adjustable Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the standard flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases.  Fits; Front All 996 / 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman.  Sold as One set for 1 wishbone. ( 2 kits needed per axle )
    £94.92 inc VAT £79.10 ex VAT
  • Sports Suspension Kit M030 OE 986 Boxster 2.5L & 2.7L 1997-2004

    SKU:4024

    3-5 Days 3-5 Days
    Full Set of Dampers & Springs, Combines shorter & stiffer springs with thicker anti-roll bars (front and rear) plus firmer bump and rebound on all four dampers. Ride height is lowered by 10 mm.
    £1,199.99 inc VAT £999.99 ex VAT
  • Damper Kit Boxster All

    SKU:5008

    3-5 Days 3-5 Days
    £1,109.60 inc VAT £924.67 ex VAT
  • EuroCupGT Uprated Track Rod End / Steering Control Arms All 1997-2012

    SKU:7375

    In Stock In Stock
    Fits all 996 / 997 / Boxster / Cayman models 1997 to 2012. Ideal Steering performance upgrade for both Road & Track, fine adjustment & robust design with sealed joints. (pair)
    £149.94 inc VAT £124.95 ex VAT
  • Elephant Racing Adjustable Rear Toe Links for Lowered Cars 996 / 997 / Boxster / Cayman

    SKU:ER2180002

    In Stock In Stock
    Lowered 966/997 run out of rear toe adjustment range. Our Adjustable rear toe links extend the range of adjustment and add bump steer correction. Adjustable Length - Threaded double adjuster for easy toe settings. Angled head - Lower the car and the toe links angle down. This shifts the ball stud from its center and limits the available range of articulation. We solve this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height. Bump steer adjustable - The built in bump steer adjustment lets you dial in a minimal bump steer curve. Fully weather sealed - Proper boots at both the ball joint and heim joint ends to keep water and contaminant out for extended life. Set comprises of 2 links.
    £742.50 inc VAT £618.75 ex VAT
  • 997 GT3 RSR/Cup Control Arm Monoball Bush Kit Front/Rear OEM Outer Control Arms

    SKU:SR049

    3-5 Days 3-5 Days
    Similar to our SR040, these Control Arm Monoballs are 17mm wider for applications where you need greater range. Use these Monoballs on 997 GT3 or Cup cars, or on other setups requiring more adjustment. Whether for a dedicated race car, or for a suspension upgrade on your street GT3, these inner Control Arm Monoballs are the ultimate upgrade or replacement. CNC machined from aircraft quality aluminum, the housing contains the BEST aerospace monoball available. Stainless steel bushings, and Jet nuts complete the package to make these assemblies your only choice for upgrading or replacement. Seals are included for the ultimate upgrade. Ideal when upgrading any 996, 997, Boxster or Cayman to track focused set up work. OEM outer control arms & shims also available. Price per pair
    £458.09 inc VAT £381.74 ex VAT
  • RSR Spec Rear Control Arm Lock Out Plate Kit. All Models 1997 to 2012

    SKU:SR084

    3-5 Days 3-5 Days
    These precision machined stainless steel RSR Spec plates provide a sure lock to eliminating unwanted camber changes caused by the factory eccentric moving under load. By bolting these plates to the chassis on the inboard end of the Rear control arm, the control arm will now be held in a constant, fixed position. Ideal when using RSR Spec Rear Control arms. Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012
    £93.49 inc VAT £77.91 ex VAT
  • Wishbone Bush Inner Boxster / 996

    SKU:4314

    3-5 Days 3-5 Days
    Priced each , Two pairs per car. For All Carrera Models plus Turbo & GT3 1997 to 2004
    £31.36 inc VAT £26.13 ex VAT
  • Porsche 996 / Boxster S 986 Carbon Fiber Strut Brace Fits Carrera Turbo C4S GT3

    SKU:00556

    In Stock In Stock
    This EuroCupGT carbon fibre strut brace is more rigid & significantly lighter than the steel ones. It is fully adjustable to make fitting easy. All parts required to fit are included. The overall weight is around 900g
    £182.69 inc VAT £152.24 ex VAT
  • Elephant Racing Bump Steer Adjustable Front Track Rod Ends for Lowered Cars 996 / 997 / Boxster / Cayman

    SKU:ER2180008

    In Stock In Stock
    Correct geometry for lowered cars with bump steer adjustment and angled head. Bump steer adjustable - The built in bump steer adjustment lets you dial in a minimal bump steer curve. Angled head - Lower the car and the tie rods angle down. This shifts the ball stud from its center and limits the available range of articulation. We solve this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height. Fully weather sealed - Proper boot at the ball stud to keep water and contaminant out for extended life. Set comprises of 2 links.
    £544.50 inc VAT £453.75 ex VAT
  • PSS10 Spring & Damper Kits Boxster 986

    SKU:GM5-8847

    3-5 Days 3-5 Days
    Ride height adjustable coil-over system with 9 different damping force settings.The damper settings are easily changed by turning the adjuster to fine tune for your driving style. The kit lowers by 30-60mm & is TUV approved
    £2,245.92 inc VAT £1,871.60 ex VAT
  • 996 / 997 GT2 & GT3 RSR Control Arm Monoball Bush Kit for Front & Rear OEM Outer

    SKU:SR083

    In Stock In Stock
    Made from the highest quality aerospace materials, the RSR spec Track rod bump steer kit will allow for precise adjustment ranging from moderate street lowering to the most aggressive race setup. These kits allow for infinite fine tuning and come complete. No other hardware or parts needed. Includes seals. Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012
    £384.95 inc VAT £320.79 ex VAT
  • Sports Suspension Kit M030 OE 986 Boxster S 3.2L 1999-2004

    SKU:4026

    3-5 Days 3-5 Days
    Full Set of Dampers & Springs, Combines shorter & stiffer springs with thicker anti-roll bars (front and rear) plus firmer bump and rebound on all four dampers. Ride height is lowered by 10 mm.
    £1,439.99 inc VAT £1,199.99 ex VAT
  • Coil & Damper Kit Boxster All

    SKU:5035

    3-5 Days 3-5 Days
    £1,353.01 inc VAT £1,127.51 ex VAT
  • SPAX Lowering Spring Kit Boxster 30mm

    SKU:7506

    In Stock In Stock
    Set of 4 lowering springs for All Boxster Models inc Boxster S . Lowers car by 30mm. SPAX spring kits are progressively wound. This offers a softer ride at low speeds & a stiffer ride at high speeds, when you need it most.
    £214.99 inc VAT £179.16 ex VAT
  • EuroCupGT Rear Adjustable Tension Control Arm 986 / 987 Boxster & Cayman 1997-12

    SKU:EURO6435BOX

    3-5 Days 3-5 Days
    EuroCupGT uprated rear suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a rose joint to allow for more accurate handling. Fits the following: All Boxster 1997 -2012 All Cayman Models 2005 -2012
    £293.81 inc VAT £244.84 ex VAT
  • RSR Spec Rear Toe Control Arm Kit. All Models. 1997 to 2012

    SKU:SR082

    In Stock In Stock
    Precision alignment and bump steer set up are critical for good handling, these RSR spec Rear Toe Control Arms are fabricated to exacting tolerances and standards, provide the premier upgrade for your track or street car. Using aerospace quality rod ends and components to provide for the most durable, accurate part available. With a left and right hand double adjuster the RSR toe link allows for extremely precise and infinite adjustment to fine tune suspension settings. Also included are seals to protect the monoballs in exposed environment. Sold p/pair Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012
    £643.45 inc VAT £536.21 ex VAT
  • Lowering Spring Kit Cayman

    SKU:1007

    3-5 Days 3-5 Days
    Lowers car by 30mm Set of 4, For All Models 2,5 / 2.7 & Boxster S
    £182.46 inc VAT £152.05 ex VAT
  • Wishbone Bush Outer Boxster / 996

    SKU:4315

    3-5 Days 3-5 Days
    Priced each , Two pairs per car, For All Carrera Models plus Turbo & GT3 1997 to 2004
    £39.05 inc VAT £32.54 ex VAT
  • Spring & Damper Kits 996 C2

    SKU:7340

    3-5 Days 3-5 Days
    Euro_Cup Super Sport were developed in conjunction with the World touring car program in 2005, the damper design helps eliminate discomfort resulted from bumps on rough roads. Sports dampers enables you to adjust the ride height with a 30-way damping adjustment. This high performance damper is suitable for weekend racing, track days & daily use.Mono ball top mounts, lightweight aluminum bottom mounts, Larger piston diameter 45mm, Full ride height adjustable. 30-way adjustable dampening
    £1,193.14 inc VAT £994.28 ex VAT
  • Elephant Racing Litronic Bracket Kit for GT3-R Type Control Arms

    SKU:ER2180009

    3-5 Days 3-5 Days
    Litronic adapter to attach litronic sending unit to GT3-R type control arms. Order 1 kit per pair of GT3-R type control arms.
    £49.50 inc VAT £41.25 ex VAT
  • 996 / 997 GT2 & GT3 RSR Control Arm Monoball Bush Kit for Front & Rear OEM Outer

    SKU:SR040

    In Stock In Stock
    Whether for a dedicated race car, or for a suspension upgrade on your road car, these RSR inner control arm monoballs are the ultimate upgrade or replacement. CNC machined from aircraft quality aluminium, the housing contains the BEST aerospace monoball available. Stainless steel bushings, and K nuts complete the package. Ideal when upgrading any 996, 997, Boxster or Cayman to track focused set up work. OEM outer control arms & shims also available. Price per pair
    £384.95 inc VAT £320.79 ex VAT
  • GT3 Cup FIXED COFFIN ARM BUSHING 996 997 Carrera Turbo 986 987 Boxster & Cayman

    SKU:SR088

    In Stock In Stock
    Not all suspension upgrades will require an adjustable castor / camer arm bushing like the SR087, thus the STOMSKI RACING's Fixed Thrust Arm Bushings provide the perfect solution for your application a standard Geometry setting is all that is required to prevent unpredictable camber changes.  Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver.  By upgrading to STOMSKI RACING's Fixed Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the stock flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases.  Fits; Front; All 996 & 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman.  Sold as One set for 1 wishbone. ( 2 kits needed per axle ).
    £84.84 inc VAT £70.70 ex VAT
  • EuroCupGT Adjustable Tension Control Arms 996 Fr & Re / 986 Front & 997 Rear

    SKU:EURO6435

    In Stock In Stock
    EuroCupGT uprated suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a Rose Joint to allow for more accurate handling. Fits the following: All 996 Models inc GT3 & Turbo Front & Rear All Boxster 986 Front Only All 997 Models inc GT3 & Turbo Rear Only
    £293.81 inc VAT £244.84 ex VAT