Porsche 997 Gen 2 Performance Exhausts 2010 to 2012

Porsche 997 Gen 2 - Performance Exhausts - 2010 to 2012

  • Exhaust Manifold Gasket 997 987 & Cayman Gen2 & 991 09-On

    SKU:8078

    In Stock

    For All Gen2 997 Models 2009 onwards, except 997 Turbo & 997 GT3
    £14.98 inc VAT £12.48 ex VAT
  • EuroCupGT Porsche 997 Turbo Billet Alloy Turbo Recirculation Dump valves ( PAIR

    SKU:ECGT-4516

    In Stock

    The piston design recirculation ( dump ) valves are a direct replacement for the original fitment. These valves give greater longevity & come with 2 spring ratings; 1Bar and 1.2 Bar. These will be required before a re map is performed to support the boost pressure required. easy 3 bolt installation with screw top for spring interchangability.
    £210.24 inc VAT £175.20 ex VAT
  • Rear Exhaust Muffler Bracket Nut & Bolt kit 996 / 997 Carrera & GT3

    SKU:3878

    In Stock

    Rear Exhaust Muffler Nut & Bolt kit Fits; 996 & 997 Carrera models 1997 to 20012 This kit replaces worn & rusty nuts & bolts, ideal for when changing your rear silencers, kit is complete for both sides.
    £13.19 inc VAT £10.99 ex VAT
  • 997 Gen-2 Tail Pipe Clamp Kit Sold Each ( 2 per Car) 2010-2012

    SKU:8081

    In Stock

    For All Gen2 997 Models 2009 onwards, except 997 Turbo & 997 GT3
    £25.00 inc VAT £20.83 ex VAT
  • Exhaust Bolt Repair Kit Boxster / 996 / 997 & Cayman. 1997 to 2012

    SKU:SR067

    In Stock

    When removing Exhaust Manifold Headers most cars these days end up with snapped & rusted exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in situe, and even after removal the task is time consuming. This Kit allows you to drill out the broken bolts accurately saving time and headaches. A CNC billet plate indexes precisely off the broken bolt holes & uses a uniquely designed thumb screw locator allowing the plate to be locked in place. Kit included pilot drills and drill guides and allows for a perfectly perpendicular and centered hole that can then be chased with the M8 tap. The kit comes in a sturdy storage case and includes the billet Indexing plate, 2x drill bits, M8 tap, M8 tap extension, drill jig guides, thumb screws, and all hardware.
    £349.99 inc VAT £291.66 ex VAT
  • 997 Gen2 Clamping Sleeve Side Boxes to Rear Box OE

    SKU:8077

    In Stock

    For All Gen2 997 Models 2009 onwards, except 997 Turbo & 997 GT3. Original Porsche.
    £38.28 inc VAT £31.90 ex VAT
  • Exhaust System 997 OE Sports Switchable 2009-

    SKU:7303

    In Stock

    switchabe sports exhaust, from standard during normal road driving to a more aggressive tone during performance use. Selected using button on centre console. On vehicles with the optional Sport Chrono Package Plus, the sport exhaust mode is enabled when the Sport Chrono Sport mode is selected. The package also includes stainless steel tailpipes with hard chrome-plated finish. For Generation 2 models 2009 onwards
    £2,285.08 inc VAT £1,904.23 ex VAT
  • Blow Off Valves to Air 997 Turbo & GT2 (3 Tuning Boost Springs) Pair 2005-2012

    SKU:11514

    In Stock

    ston Diverter bypass valves 50/50 to air ( BOV  Pop Off Valve )  Direct replacement for the original fitment in rear of Turbo Housings. Clears factory wheel arch housings so no cutting needed!  Easy DIY Fit. Note; These type give a "pop off" valve sound!! Kit Includes: 2 x Valves 2x Uprated Yellow, Blue & Red springs.
    £239.99 inc VAT £199.99 ex VAT
  • 997 Gen2 Manifold Cat to Side Box Gasket

    SKU:8080

    In Stock

    For All Gen2 997 Models 2009 onwards, except 997 Turbo & 997 GT3
    £7.49 inc VAT £6.24 ex VAT
  • Exhaust Bolt Repair Kit 996 / 997 / Turbo, GT2 / GT3 & 991 Cup / RSR

    SKU:SR068

    In Stock

    Avoid the headache of trying to drill out broken exhaust bolts on the Turbo, GT2 & GT3 engines. A CNC milled plate indexes precisely off of the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR068 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR068 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with the supplied M8x1.25 tap. Kit includes aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case.
    £299.93 inc VAT £249.94 ex VAT
  • Agency Power High Flow Cat. Back Exhaust System 997 Gen2 2009-

    SKU:AP9972170

    IN STOCKIN STOCK

    Agency Powers exhaust system for the 997 Gen2 features high quality and tuned rear boxes in addition to the high flow crosspipe in the kit. The exhaust has been tuned to produce an incredible race tone without a lot of drone found in similar designs. The exhaust fits with the Agency Power dual exhaust tips or stock tips as pictured. Since this retains the primary catalytic converters, there are no check engine light or emissions issues. The entire exhaust is 304 stainless steel and polished to a show finish. It uses the OEM mounting points and hardware.
    £1,576.08 inc VAT £1,313.40 ex VAT
  • EuroCupGt Stainless Manifold Head Bolts ( set of 12 )

    SKU:ECGT118

    In Stock

    These studs are shouldered & are designed to replace your existing corroded cylinder head to exhaust manifold bolts. Sold in packs of 12 ( one car set ) Fits all models 1997 to 2011
    £17.28 inc VAT £14.40 ex VAT