Porsche 997 Gen 2 Chassis Upgrades & Strut Braces 2010 to 2012

Porsche 997 Gen 2 - Chassis Upgrades & Strut Braces - 2010 to 2012

  • 996 / 997 Coupe 4 Point Stainless Rear Cage 1998-2012

    SKU:3481

    3-5 Days 3-5 Days
    OEM Stainless steel, easily installed, this high-precision system offers additional roll-over protection. Coupe Only
    £1,000.00 inc VAT £833.33 ex VAT
  • Agency Power Roll Cage 996 & 997 Colour:

    SKU:AP911500

    In Stock In Stock
    Safety is always the number one priority in any high horsepower or track vehicle. Agency Power has worked to develop the best fitting & functional roll bar available for the Porsche 996 997 Carrera, GT3, Turbo, and GT2 vehicles. Ultimate in protection & functional for those days where you needed the back seats. Unlike other roll bars we have seen, there is no drilling required. Direct fit using the factory seat belt mounting points, with seperate removable diagonal & harness bar. The harness bar is essential for those at the track running harnesses to keep them secured in the seat. The diagonal bar is added safety for roll over accidents & together they add rigidity to the chassis. Removable to provide full functionality of the rear seats. This roll bar height designed for easy installation & clearance on sunroof vehicles. Once installed, there is plenty of room to recline the seat or even move it backwards for the taller drivers.
    £1,499.99 inc VAT £1,249.99 ex VAT
  • Brey Krause 987 Boxster Roll Bar Track Riser / Extension 2005-2012

    SKU:R3030

    3-5 Days 3-5 Days
    Roll Bar Extension Kit for All 987 Boxster. The roll bar extension increases the available headroom in the Boxster by an additional 35mm above the factory roll hoop. Provides sufficient head room to permit the use of driving helmets. Protective tape keeps factory surfaces from becoming marred while careful engineering & design result in a secure fit that will not damage the car in anyway
    £839.99 inc VAT £699.99 ex VAT
  • Brey Krause Aluminium Harness Mount Truss - 996 & 997 Coupe 1998-2012

    SKU:4622

    3-5 Days 3-5 Days
    £1,199.99 inc VAT £999.99 ex VAT
  • Brey Krause GoPro & Camera Mount for Harness Guide Bar & Roll Cage

    SKU:R9010

    In Stock In Stock
    Stainless steel GoPro Camera mount is three axis adjustable to properly position camera. Strap secures camera to mount. Attaches to Roll Cage harness guide bar tubing
    £189.32 inc VAT £157.77 ex VAT
  • Carbon Fibre GT3 RS Cup Style Canard Dive Planes ( Pair )

    SKU:18466

    3-5 Days 3-5 Days
    Pair of Carbon Fibre Dive Planes for Front Bumper. Designed to increase Frontal down force & reduce Under Steer. Practical Styling. Ideal for Track focused cars. Can be screwed or Bonded to bumper.
    £239.99 inc VAT £199.99 ex VAT
  • EuroCupGT 997 987 Carbon Strut Brace Carrera Turbo C4S GT3 Boxster Cayman 05-12

    SKU:1338

    In Stock In Stock
    This EuroCupGT Carbon Fibre strut brace is more rigid & significantly lighter than the steel ones. All Models 2005 -2012 It is fully adjustable to make fitting easy. All parts required to fit are included. The overall weight is around 900g
    £139.98 inc VAT £116.65 ex VAT
  • EuroCupGT Flush Fitting Lockable Bonnet and Boot Catches

    SKU:4987

    3-5 Days 3-5 Days
    Ideal for track day and racing cars where secure easy access is required. Available as carbon look or plain black. These EuroCup catches fit all models 1965 - 2013. Price per pair
    £65.93 inc VAT £54.94 ex VAT
  • Harness Mount Bar For 996 & 997 Cabriolet 1998-2012

    SKU:3341

    3-5 Days 3-5 Days
    Also for Coupe cars with Bose sound system
    £839.99 inc VAT £699.99 ex VAT
  • Harness Mount Bar for All 996 & 997 Coupe inc Carrera Turbo & GT3 1998-2012

    SKU:R1030

    3-5 Days 3-5 Days
    The 996/997 harness mount bar has been tested and to handle the types of forces required by a Motor Vehicle Seat Belt Anchorages-Performance Requirements. The 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. The bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required. Material: Type 304, stainless steel Finish: Powder coated in durable black Models: 996/997 Coupe.
    £1,000.00 inc VAT £833.33 ex VAT
  • Porsche 996 / 997 Rear Carbon Fiber Strut Brace Fits Carrera Turbo C4S GT3 99-12

    SKU:11406

    In Stock In Stock
    Rear Light Weight & Polished Carbon & Alloy Strut Brace. Fits on Suspension Top Mounts inside cabin. For All Models 1997 -2012 inc all Carrera 2 / 4 / C4S GT3/RS Turbo & GTS Models
    £149.99 inc VAT £124.99 ex VAT
  • RSR IROC Bonnet Boot Engine Lid & Bumper Retaining Pin Kit All Models ( 2 )

    SKU:Bonnet Pin Kit

    In Stock In Stock
    Bonnet Boot Engine Lid & Bumper Pin Hold Down Kit. 2x lightweight threaded Billet aluminum dome pins. 2x flush mount Delrin receiver discs. 2x locking pin clips and Nuts.
    £74.99 inc VAT £62.49 ex VAT
  • Semi Solid Engine Mountings All 964 993 996 997 Turbo GT3 Boxster & Cayman Pair

    SKU:SR135

    In Stock In Stock
    By using computer engineering and digital design STOMSKI RACING has developed the FIRST truly symmetrical 911 Semi-Solid Engine/Transmission Mount, thus allowing you to run stiffer mounts without sacrificing comfort or ride quality.  Our symmetrical design allows you to custom tune your ride- determining feel, function, and fun.  Because our SS mounts are SYMMETRICAL, you can now properly use them either as an engine mount OR inverted as a transmission mount on Boxster & Cayman models. Unlike other non-symmetrical SS mounts, there is no compromise when using SR135 inverted as a transmission mount because SR135 is symmetrical and thus FULLY supports and FULLY absorbs in BOTH positions/directions. Road tested and track proven, STOMSKI RACING's SR135 provides better shifting, better weight transfer, better handling, crisper throttle response, better acceleration, and of course GREAT looks, without any loss of comfort.  Mounting  comes complete with an  aluminium housing, stainless steel sleeve and disks spacers & a M12 Schnorr washer. Sold as 1 Pair (2x Mountings)
    £399.98 inc VAT £333.32 ex VAT