Porsche 944 Chassis Upgrades & Strut Braces 1982 to 1992

Porsche 944 - Chassis Upgrades & Strut Braces - 1982 to 1992

  • Brey Krause Anti-Sub Harness Strap Mount 924 944 968 911 964 & 993 1974-1998

    SKU:5122

    In Stock In Stock
    For mounting lower center harness strap on 5 & 6 point harnesses. For 911, 964 & 993 Models from 1974-98. Attaches to floor pan using factory seat mounting points
    £149.99 inc VAT £124.99 ex VAT
  • Brey Krause Fire Extinguisher Mount for Electric Power Seats 1974-1998

    SKU:R2016

    In Stock In Stock
    Stainless steel. Fits Porsche 944, 968, 928, 911 964 & 993 Models with power Electric seats. Attaches to factory seat track hardware on Front Seat
    £119.99 inc VAT £99.99 ex VAT
  • Brey Krause Fire Extinguisher Mount Manual Seat Runners All cars 1974-1998

    SKU:R2015

    In Stock In Stock
    Satin finish stainless steel. Fits Porsche 911 964 993 924 944 & 968 with non-power seats. Attaches to factory seat track hardware under front Seat.
    £119.99 inc VAT £99.99 ex VAT
  • Brey Krause GoPro & Camera Mount for Harness Guide Bar & Roll Cage

    SKU:R9010

    In Stock In Stock
    Stainless steel GoPro Camera mount is three axis adjustable to properly position camera. Strap secures camera to mount. Attaches to Roll Cage harness guide bar tubing
    £189.32 inc VAT £157.77 ex VAT
  • Brey Krause Harness Truss Coupe 911 964 & 993 1974-1998

    SKU:5118

    3-5 Days 3-5 Days
    In response to the many requests from Porsche drivers looking for a harness guide bar that would not only guide their driving harnesses but also allow them to mount their harnesses directly to the bar, BK developed the "Harness Truss".for Motor Vehicle Seat Belt Anchorages-Performance Requirements. It's strong, yet it weighs only a fraction of what a support of the same strength made from tubular or bar steel would weigh. The Harness Truss is precision water-jet machined for a perfect fit into Porsche factory mounting points. This type of machining is accurate and does not create heat affected areas in the metal which can alter tensile strength. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. Material: 6061-T6 aluminum skeleton and reinforcing bar. Type 304 stainless steel brackets. Finish: Anodized aluminum with satin stainless mounting brackets. Models: 911 Coupes '74 - '98 Installation: Bar attaches to factory mounting points in "B" pillars. Harness Truss is designed to allow enough seat travel for tall drivers. The stainless steel mounting brackets can be left installed in the "B" pillars to easily remove and remount the bar in minutes.
    £779.99 inc VAT £649.99 ex VAT
  • Brey Krause Strut Brace 944S & 944 S2 16 Valve Cars 1986-1992

    SKU:R1521

    In Stock In Stock
    Stainless steel. Bar attaches to strut towers. Adjustable rod ends allow precise preloading
    £379.99 inc VAT £316.66 ex VAT
  • Carbon Fibre GT3 RS Cup Style Canard Dive Planes ( Pair )

    SKU:18466

    3-5 Days 3-5 Days
    Pair of Carbon Fibre Dive Planes for Front Bumper. Designed to increase Frontal down force & reduce Under Steer. Practical Styling. Ideal for Track focused cars. Can be screwed or Bonded to bumper.
    £239.99 inc VAT £199.99 ex VAT
  • EuroCupGT Flush Fitting Lockable Bonnet and Boot Catches

    SKU:4987

    3-5 Days 3-5 Days
    Ideal for track day and racing cars where secure easy access is required. Available as carbon look or plain black. These EuroCup catches fit all models 1965 - 2013. Price per pair
    £65.93 inc VAT £54.94 ex VAT
  • Front Lower Wishbone Control Arm Cross Brace Ideal For Race & Rally Applications

    SKU:5115

    In Stock In Stock
    This cross brace bolts between the rearmost mounting points of the front control arms. It resists deflection of the chassis at those points, which can occur under heavy braking and cornering. Precision waterjet machining allows for an intricate structure, providing superior stiffness at an exceptionally light weight. Material: 6061 T-6 aluminum skeleton, 304 stainless steel mount brackets Finish: Anodized aluminum Weight: 2.6 lbs
    £431.99 inc VAT £359.99 ex VAT
  • Harness Guide Bar All 924 944 968 1976-1995

    SKU:3595

    In Stock In Stock
    Stainless Steel. The harness guide bar attaches to factory mounting points in "B" pillars & shoulder straps. Designed to allow enough seat travel for tall drivers
    £419.99 inc VAT £349.99 ex VAT
  • RSR IROC Bonnet Boot Engine Lid & Bumper Retaining Pin Kit All Models ( 2 )

    SKU:Bonnet Pin Kit

    In Stock In Stock
    Bonnet Boot Engine Lid & Bumper Pin Hold Down Kit. 2x lightweight threaded Billet aluminum dome pins. 2x flush mount Delrin receiver discs. 2x locking pin clips and Nuts.
    £74.99 inc VAT £62.49 ex VAT
  • Strut Brace 944 Turbo 1986-1992

    SKU:3592

    3-5 Days 3-5 Days
    Stainless steel. Bar attaches to strut towers. Adjustable rod ends allow precise preloading
    £419.99 inc VAT £349.99 ex VAT
  • Strut Brace Brey Krause 924S & 944 8 Valve 1982-1989

    SKU:R1520

    3-5 Days 3-5 Days
    Stainless steel. Bar attaches to strut towers. Adjustable rod ends allow precise preloading
    £379.99 inc VAT £316.66 ex VAT
  • Zymol Pre-Wax Applicator

    SKU:5463

    In Stock In Stock
    £7.99 inc VAT £6.66 ex VAT