Porsche Boxster 986 Exhausts 1997 to 2004

For All models requiring an adaptor kit for the OEM Style Silencer Box.

Set of 3 Stainless Manilfold to Cat Bolts. There are three per side and Six in total

EuroCupGT Boxster 2.5, 2.7 & 3.2S A2 grade Stainless Exhaust Nuts, Bolts & Gaskets. Also includes cat pipe sleeves & Clamps, ideal when replacing or repairing your old System. Fits all cars 1997 to 2005

OEM Porsche Stainless Clamp joins the Cat pipe to the U bend on both sides. Sold each (1). two per car All Models 1997 -2004

EuroCupGT Boxster 2.5, 2.7 & 3.2S A2 grade Stainless Exhaust Nut, Bolt & Gasket, kit, ideal when replacing or repairing your old System. Fits all cars 1997 to 2005

Heat Shield over top of Catalytic Converter, Passenger side for Right Hand Drive cars & Drivers Side for Left Hand Drive cars

Heat Shield over top of Catalytic Converter, Drivers side for Right Hand Drive cars & Passengers Side for Left Hand Drive cars

OEM Style Polished 304 Stainless Steel Sports Rear Box with twin round outlets. Direct fitment for all Models, 1997 -2004

Black Carrera GT Style Tip

EuroCupGT High Quality Stainless Steel Detailed bolt on Tail Pipe

OEM M8 nut for All Exhaust applications.

Harmonically Balanced for better gas flow, Made from high grade 304 Stainless Steel. Price is per pair.

Made from high grade 304 stainless steel. 87Db providing a crisp rasp with No Drone, especially at 3,000rpm. Legal after 11pm & On most UK circuits. Click here for a video of this product in action

Fits Boxster 986 face lift 2002-2004.

EuroCupGT stainless steel Black Chrome twin round exhaust tip to compliment the Facelift 2002 to 2004 Boxster 986 Exhaust. Removal of the factory tip is necessary, this tip is quickly bolted on just like the original. Note. Please check your model before ordering as pre facelift Boxster 986 has a weld on tip!

EuroCupGT stainless steel twin round exhaust tip to compliment the later 2003-2004 986 exhaust only in chrome. Removal of the factory tip is necessary, this tip is quickly bolted on just like the original.

Upgrade for All 986 Boxster models, these 200 Cell Metalic Cats come with 2x O2 Sensor holes per cat pipe & screw out blank offs. Made from high grade 304 Stainless Steel. Price is per pair (2).

Matched for Harmonic Balance. Includes removable O2 Sensor threaded Plugs. Made from high grade 304 stainless steel. Price is per pair. Please specify Boxster year & model when ordering.

These studs are shouldered & are designed to replace your existing corroded cylinder head to exhaust manifold bolts. Sold in packs of 12 ( one car set ) Fits all models 1997 to 2011

When removing Exhaust Manifold Headers most cars these days end up with snapped & rusted exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in situe, and even after removal the task is time consuming. This Kit allows you to drill out the broken bolts accurately saving time and headaches. A CNC billet plate indexes precisely off the broken bolt holes & uses a uniquely designed thumb screw locator allowing the plate to be locked in place. Kit included pilot drills and drill guides and allows for a perfectly perpendicular and centered hole that can then be chased with the M8 tap. The kit comes in a sturdy storage case and includes the billet Indexing plate, 2x drill bits, M8 tap, M8 tap extension, drill jig guides, thumb screws, and all hardware.

OE Stainless Steel Exhaust to head Manifold Gasket. Two Per car, sold Each (1 unit ) All 996 & 997 Carrera Gen-1, Boxster & Cayman, 1998 -2009

For Early 2.5L cars only. Sold each (2 per car )

Contains; 12x Stainless Steel Manifld to Head Flange bolts and 6x sets of Manifold to Cat Pipe nuts & Bolts ( Generic picture )

For All system Joining Flanges. Includes 6x Flange Nuts & 6x Stainless Flange Bolts (6 sets in total ). Note. dose not include Head to manifold Flange Bolts (sold seperately)

Harmonically Balanced Full 304 Stainless Steel System, Includes 2x matched manifolds, 2x high flow cats, 1x high flow rear box with twin tail pipes & fitting Kit. Clamps, Gaskets & Stainless Manifold Studs. Note; the only part not included in this kit are the two (2) small U bends which connect the cat pipes to the rear silence box. You must therefore use your existing factory U bends or order these separately. Click here for a video of this product in action &

OEM O2 Sensor For All Boxster Models upto 2002 For All pre & post cat and fits both sides

For Models upto 2003 onwards

Locking Nut for exhaust System, priced each

For exhaust & inlet port studs on all cylinder heads where the threads have been damaged, or to recover from an already improper repair, we have developed this steel Insert kit so you may use the tool to insert a Time-Sert and save an otherwise ruined head. Kit includes long & short drill, counter-bore, tap, insert tool, and 10 inserts, two drill jig bushings to guide the drill and tap. Can be used on All models 911, 924, 944, 968, 928 1965 to 1998 and on later 911 / Boxster & Cayman water cooled models to replace exhaust bolts after drilling & repairs. Kit can be used time & time again by just ordering more inserts. ( Note. Studs & locking nuts are available separately )

Stainless Steel Sleeve Clamps for All Boxster 986 models 1997 to 2004 Pair (2)

Stainless steel exhaust system which is a direct fit to all Porsche Boxster 986 models from 1997 to 2004. Kit includes manifold headers, decat pipes, rear silencer boxes with twin round chrome tail pipe tips. Comes complete with all hardware including sleeve clamps & gaskets to complete the job. Note; the only part not included in this kit are the two small U bends which connect the cat pipes to the rear silence box. You must therefore use your existing factory U bends or order these separately from our ebay shop. Please note we have a limited stock of these systems! Note. For Manual Transmission Cars Only!! Fitting service available at favorable rates, Please call 0121 585 6088 for further details.

Used when replacing the Rear silencer, U bends and / or Cats. Stainless Steel

Mandral Bent 304 Polished Stainless Steel. Sold Per Pair (2) For All Boxster 986 Models 1997-2004

OEM Stainless Steel Porsche Boxster & Boxster S 986 Stainless Exhaust clamp; U bend to Rear Silencer Boxes. All Models 1997 -04

OEM Stainless Steel Porsche Boxster & Boxster S 986 Stainless Exhaust clamps set Two (2) for U bend to Rear Silencer Boxes. All Models 1997 to 2004

Original Style Rear Box with twin outlets. For all 2.5 , 2.7 & 3.2 Models. Made by DanskPlease note 2.5 models will require the adaptor kit listed below

Boxster Replacement Cat 2.5 Left Hand Side

Boxster Replacement Cat 2.5 Right Hand Side