Choose Currency

Porsche 993 Engine Components 1994 to 1998

Porsche 993 - Engine Components - 1994 to 1998

  • 120 Degree Vacuum Elbo pipe for Inlet Manifold & Heater Systems 90 Degrees Also

    SKU:928.574.717.05

    In Stock In Stock
    £5.99 inc VAT £4.99 ex VAT
  • 911 Cam Box Round End Cap Seal Housing 911 / 930 Turbo 964 & 993 1965-1998

    SKU:930.105.196.00

    In Stock In Stock
    911 Cam Box Round End Cap Seal Housing All 911 & 930 / 965 Turbo / 964 & 993 1965-98 Sold Each ( 2 per car )
    £40.00 inc VAT £33.33 ex VAT
  • 911 Exhaust Head Stud Repair Kit Including 964 & 993 1965 to 1998

    SKU:SR065

    In Stock In Stock
    For Replacing bent or broken exhaust stud on all 911 engines. This new tool is a must for every 911 mechanic and will pay for itself the first time you use it. This is a quick and totally accurate tool to repair and replace broken studs without damaging the heads or removing the engine. The fixture indexes off of the exhaust port by using one of the various sized port bushings, secures to the opposite stud, and allows you to drill out, tap, and replace the stud accurately. Includes LH drill bits, tap with extension, drill jig guides, port bushings, and storage case. Fits ALL 911 heads including 964 & 993 1965 to 1998 (Now Includes SR065D Drill Guide)
    £324.98 inc VAT £270.82 ex VAT
  • 911 Head Studs Height Setting Tool 1965 to 2012

    SKU:SR099

    In Stock In Stock
    Precisely set the height of head studs on all the 911 engines using this innovative tool. The Delrin insert protects the engine case from scratches or marring, while the adjustable three-piece anodized aluminium tubular construction provides complete flexibility for all engine setups, tools, and stud combinations. For all 911, 964,993, 996 & 997 Turbo, GT2 & GT3 Engines
    £104.99 inc VAT £87.49 ex VAT
  • 911 R / ST / RS / RSR - Spark Plug Wire Holder Set (6) All Models 1965-Onwards

    SKU:ST911R-Spark Plug Lead Holders

    In Stock In Stock
    R / ST / RS / RSR - Spark Plug Wire Holder Set (6) Stainless Steel Based on the original R / RSR style design. U updated for better lasting, ease of use and clean look. Made from 306 stainless steel.
    £35.99 inc VAT £29.99 ex VAT
  • 911, 930, 964 & 993 Cam Carrier Oil Housing Block Off Plate 1965-1998

    SKU:SR044

    In Stock In Stock
    Use this plate to block off the power steering pump opening on the cam housing on 964 or 993, or for oil and injection pump openings on 930 Turbo's & earlier 911 E & S models. This plate is custom designed to allow for both standard and non-standard cams. Anodised aluminium. Sold Individually.
    £83.99 inc VAT £69.99 ex VAT
  • 993 Exhaust Valve Guide All 1994-1998 Sold Each (1) 6 per car

    SKU:993.104.321.71

    3-5 Days To Order By Request (5+ days)
    OEM Exhaust Valve Guide
    £29.99 inc VAT £24.99 ex VAT
  • 993 Inlet Valve Guide All 1994-1998 Sold Each (1) 6 per car

    SKU:993.104.322.71

    In Stock In Stock
    OEM Valve Guide for Inlet Valve Only
    £23.99 inc VAT £19.99 ex VAT
  • 993 Valve Stem Oil Seals All Models 1994-1998

    SKU:993.104.111.01

    In Stock In Stock
    OEM Sold Eack (1) 12 per car
    £3.98 inc VAT £3.32 ex VAT
  • 993 Vario Ram Cam Sprocket Nut Timing Tool 1996-1998

    SKU:SR9582

    In Stock In Stock
    Cam Nut Tool For later Vario Cam Cars Only. Replaces Factory Tool P9582
    £149.99 inc VAT £124.99 ex VAT
  • 996 & 997 Turbo, GT2 & GT3 Cam Sprocket Tool Also 993 Vario Ram 1996-1998

    SKU:SR9653

    In Stock In Stock
    Our version of this tool eliminates the need to buy two factory tools, this tool replaces them both. Moreover, additional refinements of this tool ensures that while torquing either the 16mm hex or the triple-box center bolts, your tool is securely supported and will not slip off. Black oxide finished hardened steel. Uses 1/2" Drive Standard Braker Bar, Extensions and/or Torque Wrench. Also Use on 991 Carrera Cup and Later 993 Vario Ram Engines after 1996.
    £199.98 inc VAT £166.65 ex VAT
  • Air Shroud for Vario Cam 993 Fan Housing 1996-1998

    SKU:993.106.403.00

    In Stock In Stock
    For Late Models with Variocam Only
    £44.99 inc VAT £37.49 ex VAT
  • Alternator Fan Belt 964 & 993 Tiptronic Cars 1989-1998 ( Not manual )

    SKU:999.192.343.50

    In Stock In Stock
    V Belt for Alternator Fan & tool kit 1989 -1998 Sold Each (1) Tiptronic Cars Only
    £14.99 inc VAT £12.49 ex VAT
  • Alternator Nose Bearing 964 / 993 1989-1998

    SKU:18038

    In Stock In Stock
    OEM Bearing on Twin Belt Alternator. All Models
    £149.99 inc VAT £124.99 ex VAT
  • ARP Engine Block to Transmission Nut & Stud Kit All 1965-Onwards

    SKU:19123

    3-5 Days To Order By Request (5+ days)
    High Tensile M10 Studs inc Starter Motor mounting stud
    £149.99 inc VAT £124.99 ex VAT
  • Autoglym Engine & Machine Cleaner

    SKU:1109

    In Stock In Stock
    A powerful, non-corrosive, multi - surface cleaner for engines, components, wheels & machinery
    £14.99 inc VAT £12.49 ex VAT
  • Auxiliary Air / Cold Start OEM Valve All 993 & 993 Turbo 1994-1998

    SKU:4494

    In Stock In Stock
    £239.99 inc VAT £199.99 ex VAT
  • Ball Socket for Throttle Linkage All Modela 1965-1998

    SKU:911.423.147.00

    In Stock In Stock
    OEM Throttle Linkage Ball Socket. All Models
    £7.49 inc VAT £6.24 ex VAT
  • Big End Bearing Set All 993 models & 996 / 997 Turbo & GT2 1994-2009

    SKU:4310

    In Stock In Stock
    Standard size Bearing set of 12. For oversize 0.25mm & 0.5mm please contact us
    £199.99 inc VAT £166.66 ex VAT
  • Big End Con Rod Bolts 911 3.2 & 3.3 964 993 996 / 997 Turbo & GT2 1993-2012

    SKU:996.103.176.70

    In Stock In Stock
    OEM Bolt M9 thread for later 911 3.2 Carrera 930 Turbo 964, 993 & 996 / 997 Turbo models
    £11.99 inc VAT £9.99 ex VAT
  • Big End Con Rod Nut 911 3.2L Carrera 964 993 & 930 996 / 997 Turbo 1978-2012

    SKU:00144

    In Stock In Stock
    OEM Porsche Con Rod Nut for all late 911's 964, 993 & 930 996 / 997 Turbo Models. Sold Each. 12 per car. Note Please quote model & year when ordering
    £2.98 inc VAT £2.48 ex VAT
  • BMC Performance Air Filter 3-5bhp All 993 Carrera & Turbo models 1994-1998

    SKU:7250

    In Stock In Stock
    Hi flow cotton air filter, better throttle response & hp, washable, Fits All 993 Models
    £71.99 inc VAT £59.99 ex VAT
  • Bolt For Cam Chain Guide Rail 964 993 & 996 / 997 GT3 & Turbo 1989-2012

    SKU:964.105.171.03

    In Stock In Stock
    £29.99 inc VAT £24.99 ex VAT
  • CAM BOLT TOOL 911 SC 3.2 Carrera 930 Turbo 964 & 993 1981-1996

    SKU:SR1919

    In Stock In Stock
    STOMSKI RACING's version of the P9191 tool combines the basics of the factory tool and improves on it by adding an integral 19mm bushed socket that prevents slippage and rounding off of the cam bolt on the end of the cam shafts. The cam bolt on the SC, Turbo & Carrera requires a torque of 88 foot pounds. Tightening the bolt to this spec, or loosening it using a breaker bar and the factory long-armed cam tool, requires dexterity, leverage, and serious luck that the deep socket does not slip off the head of the bolt, rounding it over, or busting knuckles in the process. STOMSKI RACINGs SR9191 securely holds an impact-quality socket in the center of a precision machined hardened steel socket, ensuring ease and accuracy in loosening the bolt, or setting the required torque. The bushing prevents the socket from being leveraged off the bolt head, keeping it squarely in place for the most accurate torque and security during installation and removal. The SR9191 replaces both the factory Porsche P9191 tool and the SR078 Tools. Uses 1/2" Drive Standard Braker Bar, Extensions and/or Torque Wrench. Note. For Later 993 1996 -1998 Vario Ram cars please see SR9653
    £164.99 inc VAT £137.49 ex VAT
  • Cam Chain Guide Ramp Curved 964 & 993 1989-1998 Not Handed

    SKU:17073

    3-5 Days To Order By Request (5+ days)
    OEM Curved Chain Ramp. Both Sides Sold Each. 2 per car
    £59.99 inc VAT £49.99 ex VAT
  • Cam Chain Tensioner Left Bank cyl 1-3 964 & 993 1989-1998

    SKU:15040

    In Stock In Stock
    OEM Tensioner Left Bank
    £161.99 inc VAT £134.99 ex VAT
  • CAM CHAIN TENSIONER SETUP ADJUSTERS 964 993 996 997 GT3 & Turbo ( Pair )

    SKU:SR9401

    3-5 Days To Order By Request (5+ days)
    STOMSKI RACING compact versions of the Factory Timing tool allows for easier installation and removal, included thumbscrews can be used to attach these tensioners. Precise springs and tolerances provide for proper tension of the chain. Stainless steel and anodized aluminum insure this tool will provide years of service. Comes in a set of two (2), so engines can be turned over wile checking. 964 993 996 & 997 GT2 GT3 RS Cup RSR & Turbo ( Includs 991 Cup )
    £239.99 inc VAT £199.99 ex VAT
  • Cam Drive Timing Cog Behind Cam Drive Gear 911 / 930 / 964 / 993 1965-1998

    SKU:901.105.583.01

    In Stock In Stock
    OEM Gear behind Cam gear
    £74.99 inc VAT £62.49 ex VAT
  • Cam Gear Drive Dowel Pin 911 / 964 / 993 1965-1998

    SKU:900.243.001.00

    In Stock In Stock
    £1.99 inc VAT £1.66 ex VAT
  • Cam Gear Drive Sprocket 911 / 930 / 964 / 993 1965-1998

    SKU:901.105.546.02

    In Stock In Stock
    OEM Cam Gear. All Models Left & Right bank
    £81.60 inc VAT £68.00 ex VAT
  • Cam Shaft Hydraulic Rocker 993 All Models OEM 1994-1998

    SKU:4312

    3-5 Days To Order By Request (5+ days)
    OEM Hydraulic Tappet
    £35.99 inc VAT £29.99 ex VAT
  • Cam Shaft Hydraulic Rocker 993 All Models Porsche 1994-1998

    SKU:993.105.141.03

    3-5 Days To Order By Request (5+ days)
    OEM Porsche
    £83.99 inc VAT £69.99 ex VAT
  • CAM SPROCKET ALIGNMENT TOOL All 911 930 Turbo 964 & 993 1965-1998

    SKU:SR008

    In Stock In Stock
    Sprocket alignment on the 911 engine requires an accurate and repeatable ability to measure the offset of the sprockets and lay shaft. Simply using a straight edge and vernier calipers requires at least three hands and rarely produces precise measurements. Now, with the SR008, measuring sprocket alignment on the 911 engine has never been simpler, more accurate, or more repeatable. A precisely fabricated block of 6061 aluminum secures an oversized Starrett straight edge to enable easy and exact measurements. No more guessing or settling for "close enough." Includes custom caliper base, as well as thumb screws for mounting on all 911 engines including the 964 & 993 based cars.
    £179.99 inc VAT £149.99 ex VAT
  • Cam Sprocket Gear Drive Bolt 911 930 Turbo 964 993 All 1981-1998

    SKU:900.082.072.01

    In Stock In Stock
    OEM Cam Gear Securing Stretch Bolt. Replace on strip down. All 1981 -1998 Sold Each 2 per car
    £3.00 inc VAT £2.50 ex VAT
  • Cam Timing Chain Continuous 911 964 993 965 & 930 Turbo 1965-1998

    SKU:2194

    In Stock In Stock
    OEM Endless Timing Chain for Full Engine rebuilds Only. Sold Each, 2 per car.
    £35.94 inc VAT £29.95 ex VAT
  • Cam Timing Chain Split Type 911 964 993 965 & 930 Turbo 1965-1998

    SKU:09426

    In Stock In Stock
    OEM Split Timing Chain with Cotter Pin. Sold Each. 2 per car
    £40.00 inc VAT £33.33 ex VAT
  • Chain Ramp Left Bank Cyl 1-3 964 & 993 1989-1998

    SKU:1293

    3-5 Days To Order By Request (5+ days)
    OEM Chain Ramp. Left Bank Lower.
    £44.99 inc VAT £37.49 ex VAT
  • Chain Ramp Right Bank Cyl 4-6 964 & 993 1989-1998

    SKU:4313

    3-5 Days To Order By Request (5+ days)
    OEM Ramp Right Bank Upper
    £41.99 inc VAT £34.99 ex VAT
  • Copper Nuts for Exhaust Manfold Studs M8 All Models

    SKU:999.084.611.02

    In Stock In Stock
    OEM M8 nut for All Exhaust applications.
    £1.19
  • Crank Case Head Bolt O Ring Installer All Models 1965-Onwards

    SKU:SR024

    In Stock In Stock
    Based on the factory P9511 tool, STOMSKI RACING's version of this tool incorporates a brass cap and a double-ended stainless steel sleeve to install the O-rings on the crankcase through-bolts. By using it, the brass cap to protects the delicate O-ring from getting cut on the threads of the bolt, you can then use the "thin" end of the sleeve to slide the O-ring over the brass cap onto the shank of the through-bolt. Once the o-ring is clear of the threads, remove the SR024 brass cap and flip the SR024 stainless steel sleeve over and use the blunt end to securely and gently seat the O-ring in the recess on the crank case.
    £49.99 inc VAT £41.66 ex VAT
  • Crank Case Head Stud Driver All 911 964 993 996 / 997 GT3 & Turbo Models 1965-On

    SKU:SR099D

    In Stock In Stock
    Simple Allen Key Lock Single Action. Double-nutting a head stud to install it into the engine case not only takes time, but can be stressful for the threads, and can lead to variations in stud depth . Protect your hardware investment and speed installation by using the Head Stud Driver. Made from black oxide finished hardened steel, this uniquely designed tool threads onto the head stud but will not clamp on to the threads, making installation faster, gentler, and more accurate.
    £47.99 inc VAT £39.99 ex VAT
  • Crank Case Sealant 911 964 993 996 / 997 Turbo & GT3 Cayenne OEM

    SKU:000.043.204.58

    In Stock In Stock
    OEM Porsche Approved Case Sealant for Main Join. Can also be used on Earlier 911's
    £35.99 inc VAT £29.99 ex VAT
  • Crank Case Through Bolt "NUT" 964 993 / 996 & 997 Turbo & GT3 +991 Cup 1989-2012

    SKU:959.101.172.00

    In Stock In Stock
    Through Bolt Nut for all Crank cases 1989-Onwards Inc GT3Cup ( 12 per car )
    £3.59 inc VAT £2.99 ex VAT
  • Crank Case Through Bolt Washer 964 993 997 / 997 Turbo & GT3 ( 24 ) Sold Each

    SKU:964.101.313.71

    In Stock In Stock
    OEM Porsche Crank Case Steel Sealing Washer. All Models Inc 991 Cup
    £4.99 inc VAT £4.16 ex VAT
  • Crank Shaft GT3 / GT3RS & GT3Cup 3.6L & 3.8L 2003-2012

    SKU:996.102.021.93

    3-5 Days To Order By Request (5+ days)
    OEM Porsche GT3 Crank shaft for all 3.6 & 3.8 applications 996 997 & 991 Cup. Can also be used in 996 / 997 Turbo with our Pauter Con Rod Kit. Also 964 & 993 with modifications.
    £2,086.96 inc VAT £1,739.13 ex VAT
  • Cylinder Head Nut & Washer Kit 911 / 964 / 993 1965-1998

    SKU:11984

    In Stock In Stock
    Full Set for one Engine. Replace on each rebuild
    £74.99 inc VAT £62.49 ex VAT
  • Cylinder Head Nut 964 993 & 996 / 997 GT3 & Turbo 1989-2012

    SKU:964.104.382.01

    In Stock In Stock
    £3.59 inc VAT £2.99 ex VAT
  • Cylinder Head Nut All 911 & 930 Turbo & All Bell Housings 1965-1989 Sold Each 1

    SKU:901.104.382.02

    In Stock In Stock
    OEM Head Nut. Sold Each (24 per car ) Starter Motor & Bell Housing for All 911/964 & 993
    £2.99 inc VAT £2.49 ex VAT
  • Cylinder Head Stud (Dilavar) All 911 930 964 & 993 models 1965-1998

    SKU:2197

    In Stock In Stock
    OEM Uprated studs. Used on lower set of all 911 (x12 ) & Upper & Lower sets on all 930 Turbo 964 & 993 (24). It is Recommend replacing all 24 on all 911 engines when rebuilding engines.
    £41.24 inc VAT £34.37 ex VAT
  • Engine Alternator Fan Housing Strap 1989-1998

    SKU:964.106.017.01

    In Stock In Stock
    £159.98 inc VAT £133.32 ex VAT
  • Engine Block Oil Bung & Oil Pressure Valve Cap 964 993 996 / 997 Turbo & GT3

    SKU:900.219.006.01

    In Stock In Stock
    OEM Bung With Washer
    £11.99 inc VAT £9.99 ex VAT
  • Engine Mounting All Models Upto-1998

    SKU:34849

    In Stock In Stock
    OEM Engine Mounting. All cars Ex RS
    £179.99 inc VAT £149.99 ex VAT
  • EuroCupGT Crank Case Breather ( K&N Type ) Chrome top 10-15mm inlet

    SKU:11188

    In Stock In Stock
    Small Cotton Gauze Filter ideal for Crank case Breather & air intake bypass pipes. aprox 40mmx50mm with small rubber inlet 10mm -15mm pipe.
    £17.99 inc VAT £14.99 ex VAT
  • Exhaust & Inlet Manifold Studs Sold Each (1) All Models 1965-Onwards

    SKU:00118

    In Stock In Stock
    Priced each (1). For cars 4 cyl =8 / 6 cyl =12 / 8 cyl = 16
    £3.98 inc VAT £3.32 ex VAT
  • Exhaust Gasket Set Complete All 993 Carrera & Turbo Stainless Steel 1994-1998

    SKU:4510

    In Stock In Stock
    £149.99 inc VAT £124.99 ex VAT
  • Exhaust Valve 993 Carrera

    SKU:4317

    In Stock In Stock
    £69.98 inc VAT £58.32 ex VAT
  • Flywheel Bolt 911 930 Turbo 924S 944 & Turbo 968 964 993 996 / 997 GT3 1978-2012

    SKU:7584

    In Stock In Stock
    OEM Single Mass Flywheel Bolt. Sold Each 9 per car ( M10x1.25x20mm ) Inc Club Sport, RS & GT3 Cup Models
    £4.99 inc VAT £4.16 ex VAT
  • Flywheel Bolt For Duel Mass 968 964 993 996 / 997 Turbo & GT3 1989-2012

    SKU:999.119.017.01

    In Stock In Stock
    OEM Long Bolt For Duel Mass Flywheel. Sold Each, 9 per car
    £2.75 inc VAT £2.29 ex VAT
  • Flywheel Sensor 964 / 993 Manual Gearbox Cars 1989-1998

    SKU:911.606.217.03

    3-5 Days To Order By Request (5+ days)
    OEM Bosch Sensor
    £99.98 inc VAT £83.32 ex VAT
  • Flywheel Sensor 964 / 993 Tiptronic & 996 Turbo Manual 1989-2004

    SKU:996.606.105.00

    In Stock In Stock
    OEM Sensor. For 993 & 964 also use Porsche update bracket SKU; 964.101.187.01 ( as used on later cars )
    £119.99 inc VAT £99.99 ex VAT
  • Flywheel Sensor Bracket 964 / 993 & 996 997 GT3 & Turbo models 1989-2012

    SKU:964.101.187.01

    In Stock In Stock
    OEM Bracket. Updates early 964 & 993 Models. Also for 991 GT3 Cup.
    £23.99 inc VAT £19.99 ex VAT
  • Fuel Pressure Regulator on Rail All 993 / 996 Turbo & GT3 1994-2004

    SKU:993.110.199.00

    In Stock In Stock
    OEM Reg on Fuel Rail. Clip in type. All 993 models & 996 Turbo / GT3 Only
    £137.99 inc VAT £114.99 ex VAT
  • Fuel Pump & Fuel Filter Air Box & Oil Cooler Rubber Mount All Models 1965-1998

    SKU:944.610.115.00

    In Stock In Stock
    OEM Rubber Cotton Real Mount with M6 threaded ends for Fuel Pump, Fuel Filter, Oil Cooler, Air Box & Header Tanks etc. Popular on many applications
    £9.98 inc VAT £8.32 ex VAT
  • GT3 RS / Cup Crank Pulley 996 / 997 Turbo GT3 1999-2012

    SKU:12249

    In Stock In Stock
    OEM GT3RS / GT3Cup Light weight Alloy Front Pulley woth Dowl pin. Fits all 996/997 GT3 & Turbo Models inc GT2
    £239.99 inc VAT £199.99 ex VAT
  • Head Gasket Set All 993 Carrera 2 C2S / C4 C4S Turbo & RS 1994-1998 OEM

    SKU:4512

    In Stock In Stock
    OEM Head Gasket ( Top End Set ) All 1994 -1998
    £399.98 inc VAT £333.32 ex VAT
  • Heat Exchanger Nuts Allen Hex Head All models 1965-Onwards M8x1.25mm

    SKU:2964

    In Stock In Stock
    6 -12 per car , Priced each (1)
    £2.99 inc VAT £2.49 ex VAT
  • Inlet Valve 993 All inc Turbo 1994-1998

    SKU:4318

    In Stock In Stock
    £88.48 inc VAT £73.73 ex VAT
  • Intermediate Shaft Bearing set (4) All Models 1965-1998 + 996/997 Turbo & GT3/RS

    SKU:4291

    3-5 Days To Order By Request (5+ days)
    Price for a full set of 4 Oil Pump Drive Bearing Set. All 911 964 & 993 Models 996 & 997 Turbo / GT2 & GT3 / RS 991 GT3 Cup Only
    £59.99 inc VAT £49.99 ex VAT
  • Intermediate shaft Cam Drive Gear 911 964 993 996 / 997 Turbo & GT3 1965-2012

    SKU:901.105.125.04

    In Stock In Stock
    OEM Duplex Cam Drive Gear on Intermediate Shaft. Advise changing on Full engine strip downs. Also GT3 Cup & RSR / 991 Cup. Sold Each, 2 per car
    £64.99 inc VAT £54.16 ex VAT
  • Intermediate Shaft Gear Complete ( Exchange) 911 964 993 & 996 997 Turbo GT3 Cup

    SKU:11255

    In Stock In Stock
    Oil Pump & Cam Drive Lay Gear All cars 911, 930 Turbo, 964, 993, 996 & 997 Turbo, GT2 & GT3. Note; this is a reconditioned item. A surcharge of £120 is included in this price & is refundable on return of serviceable core unit. Please state vehicle Model & year when ordering.
    £499.99
  • K&N Air Filter 3-5bhp 993 & 993 Turbo 1994-1998

    SKU:1600

    In Stock In Stock
    Well known for quaility & performance K&N offers increased Air flow &throttle response, Replaces paper filter & is washable. Fits All Porsche 993 's
    £79.99 inc VAT £66.66 ex VAT
  • Knock Sensor on Engine 928 S4 GT & GTS / 964 & 993 1990-1998

    SKU:1237

    In Stock In Stock
    OEM Bosch part
    £119.99 inc VAT £99.99 ex VAT
  • LEAK-DOWN & COMPRESSION TESTER ADAPTER All Porsche Plug Threads 1965-2021

    SKU:SR032

    In Stock In Stock
    You no longer need to fight or snake a flexible rubber hose blindly through the valve cover and into the cylinder head to hook up a compression or leak down gauge on the 911 engines (or other engines with remote spark plugs). Simply insert this unique tool into the spark plug hole of the cylinder head and attach your gauge. Precisely machined from high quality stainless steel or hard-coated aluminum. 14mm Thread for All Models Ideal for all Multi Valve Engines; 944 968 928 911 964 993 996 997 Boxster Cayman Cayenne Panamera 996 GT3 & 996 / 997 Turbo Models.
    £69.98 inc VAT £58.32 ex VAT
  • LOCTITE 574 Case Sealent OEM 50ml

    SKU:5027

    In Stock In Stock
    Loctite 574 is the Porsche preferred sealant for assembling your Porsche engine case. Loctite 574 remains liquid when exposed to air, but cures when confined between mating engine surfaces.
    £39.98 inc VAT £33.32 ex VAT
  • M10 Flang Nut For Suspension All Models 1965-Onwards

    SKU:999.076.053.01

    In Stock In Stock
    OEM Porsche Flange Nut For All Suspension, Engine, Chassis & Gearbox applications
    £2.39 inc VAT £1.99 ex VAT
  • M10 Studs for All Turbo & Exhaust down pipe & 911 Crank Case Rear Support

    SKU:900.081.052.02

    In Stock In Stock
    Large Stud for Turbo mounting & engine Mounting
    £5.99 inc VAT £4.99 ex VAT
  • M6 Stainless Bolts All Brake Backing Plates & cam Belt Covers etc ( set of 4 )

    SKU:8209

    In Stock In Stock
    Popular For Front & Rear Back Plates & Belt Covers & Other applications
    £2.99
  • M6x25mm Stud for Cam Cover All 964 / 993 1989-1998

    SKU:999.062.127.02

    In Stock In Stock
    £5.99 inc VAT £4.99 ex VAT
  • M8 Time Sert Thread Repair Kit. Intake & Exhaust. All models 1965 Onwards

    SKU:SR066

    In Stock In Stock
    For exhaust & inlet port studs on all cylinder heads where the threads have been damaged, or to recover from an already improper repair, we have developed this steel Insert kit so you may use the tool to insert a Time-Sert and save an otherwise ruined head. Kit includes long & short drill, counter-bore, tap, insert tool, and 10 inserts, two drill jig bushings to guide the drill and tap. Can be used on All models 911, 924, 944, 968, 928 1965 to 1998 and on later 911 / Boxster & Cayman water cooled models to replace exhaust bolts after drilling & repairs. Kit can be used time & time again by just ordering more inserts. ( Note. Studs & locking nuts are available separately )
    £149.99 inc VAT £124.99 ex VAT
  • MAF Air Flow Sensor All 993 models 1994-1998

    SKU:4492

    In Stock In Stock
    OEM Bosch Porsche. Note. Pease use Year & Model drop down boxes when checking out
    £399.98 inc VAT £333.32 ex VAT
  • Main Bearing Set 911 964 993 930 996 & 997 Turbo & GT3 1984-2012

    SKU:00292

    In Stock In Stock
    OEM Glyco Main Bearing Set inc Thrust Bearings 1984 -Onwards. Please specify; Standard Size, -0.25, or -0.50 when Ordering.
    £239.99 inc VAT £199.99 ex VAT
  • Mountig Bolt Kit for Engine & Gearbox Stand

    SKU:SR028

    In Stock In Stock
    Secures your engine or Gearbox to the engine Stand yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminium nuts and stainless steel sleeves. 1 Set For All Models. Note dose not include the Blue Bracket in the picture which is shown for descriptive purposes only.
    £49.98 inc VAT £41.65 ex VAT
  • Nose Bearing for Crank Shaft All 1965-1998 996/997 Turbo & GT3 1999-2012

    SKU:964.101.138.01

    In Stock In Stock
    Standard Size for all 911 930 964 & 993 Crank Cases. Also 996 & 997 GT3 & Turbo engines (Inc 991 GT3 Cup)
    £359.99 inc VAT £299.99 ex VAT
  • OEM Piston Ring Compressor for All 911 964 993 924 944 928 & 968 models 1965-98

    SKU:18806

    In Stock In Stock
    Adjustable for all Piston Sizes and can be un locked once the barrel is pushed over the piston rings.
    £59.99 inc VAT £49.99 ex VAT
  • Oil Filter Housing Drain Plug 1994-1998

    SKU:993.207.258.02

    3-5 Days To Order By Request (5+ days)
    £29.99 inc VAT £24.99 ex VAT
  • OIL HOSE BOTTOM Of TANK to REGULATOR 1989-Onwards

    SKU:964.207.251.03

    In Stock In Stock
    £40.00 inc VAT £33.33 ex VAT
  • Oil Pressure Switch / Sender Unit 924S 944 968 928 964 & 993 1977-1998

    SKU:00114

    In Stock In Stock
    OEM Oil Sender Unit for All 924S 944 968 928 964 & 993 Models 1977 -1998
    £35.99 inc VAT £29.99 ex VAT
  • Oil Pressure Warning Light for Clock replacement Red & Billet Alloy R & RSR

    SKU:11633

    In Stock In Stock
    Low Oil Pressure Indicator Light All PORSCHE 911 / 964 / 993 & Turbo Models. Specially designed to replace and fit in place of the dash mounted clock - 80mm Dia. Black Anodized Billet Aluminum Bezel and bright warning light. Includes wiring to redirect from original oil pressure indicator gauge. Specially designed to get your attention when driving to avoid engine damage on low engine oil pressure. Ideal for Historic Race & Rally cars
    £124.98 inc VAT £104.15 ex VAT
  • Oil Pump 930 Turbo 964 993 & 996 / 997 Turbo & GT3 / RS 1978-2012

    SKU:18836

    In Stock In Stock
    OEM Porsche Pump. Fits Following Models as Standard 930 Turbo 1978 -1989 964 All 1989 -1994 993 All 1994 -1998 996 Turbo & GT3 1999 -2004 997 Turbo & GT3 2005 -2012 Note Can be retro fitted to Earlier 911 Engines with shorter input shaft.
    £1,199.99 inc VAT £999.99 ex VAT
  • Oil Pump to Intermediate shaft Drive Sleeve All Turbo / GT3 / 964 & 993 1974-201

    SKU:930.107.143.03

    In Stock In Stock
    OEM joiner part No. 2 ( Not Pump ) Models 930 Turbo 1974 -1989 All 964 1989 -1994 All 993 1993 -1998 996 Turbo & GT3 1999 -2004 997 Turbo & GT3 2005 -2012 991 GT3 Cup 2013 -2017
    £49.99 inc VAT £41.66 ex VAT
  • Oil Return Tube (Non Collapsible) 911 930 Turbo 964 & 993 1965-1998

    SKU:2199

    In Stock In Stock
    OEM Oil Tube. Sold Each 4 per car
    £12.98 inc VAT £10.82 ex VAT
  • Oil Return Tube Collapsible 911 930 Turbo 964 & 993 1965-1998

    SKU:2198

    3-5 Days To Order By Request (5+ days)
    Stop oil leaks, Can be fitted without removing heat exchangers or Heads. Sold Each. 4 per car.
    £29.99 inc VAT £24.99 ex VAT
  • Oil Tank Filler Cap Bayonet Fitting 911 SC Carrera 930 Turbo 993 1965-1998

    SKU:5863

    In Stock In Stock
    All 911 & 993 Models
    £59.99 inc VAT £49.99 ex VAT
  • Piston Circlip Installer 924, 944, 928, 968, all 911 84 to 89, 964, 993 - 23mm

    SKU:SR073

    In Stock In Stock
    £99.98 inc VAT £83.32 ex VAT
  • Piston Ring Set 102mm for 964 & 993 RS 3.8L 1989-1998

    SKU:1265

    In Stock In Stock
    OEM 3.8L Piston Ring set. Sols 1 piston set. 6 per car
    £106.80 inc VAT £89.00 ex VAT
  • Piston Ring Set 993 All 3.6L Inc Turbo 1994-1998

    SKU:00130

    In Stock In Stock
    OEM Ring Set for 1 Piston. ( 6 Per Car )
    £35.99 inc VAT £29.99 ex VAT
  • Plug Lead Set Porsche 993 All Carrera Turbo & GT2 1994-1998

    SKU:1932

    In Stock In Stock
    Full Set of 12 Plug leads plus coil lead. Original Equipment Manufacturer
    £299.99 inc VAT £249.99 ex VAT
  • Power Steering Pump Drive Belt All 964 & 993 models 1989-1998

    SKU:1487

    In Stock In Stock
    OEM Toothed Belt. All Models 1989 -1998
    £41.99 inc VAT £34.99 ex VAT
  • Pump Drive Gear on back of Left Cam 911 930 964 & 993 1965-98 MFI

    SKU:901.110.023.00

    In Stock In Stock
    Drive Gear on Cam for MFI Pump, Turbo Oil Scavenge Pump & Power Steering Pump
    £138.00 inc VAT £115.00 ex VAT
  • Pump Gear on 911 MFI Pump 930 Oil Pump & 964 / 993 Power Steering Pump 1965-On

    SKU:15275

    In Stock In Stock
    For All 3 bolt Engine Pumps
    £132.00 inc VAT £110.00 ex VAT
  • Rocker Arm Tappet Holder All 993 Models 1993-1998

    SKU:993.105.085.00

    3-5 Days To Order By Request (5+ days)
    £99.98 inc VAT £83.32 ex VAT
  • Rocker Shaft for Cam Follower All 993 Models 1993-1998

    SKU:19394

    In Stock In Stock
    £83.99 inc VAT £69.99 ex VAT
  • RS Type OEM Solid Billet Fan Drive Hub for 964 & 993 All Models 1989-1998

    SKU:993.106.051.80

    In Stock In Stock
    964 / 993 RS SOLID HUB FOR AIR COOLED IMPELLER FAN & ALTERNATOR DRIVE. - IDEAL FOR MOTORSPORT & ENGINE CONVERSIONS - ORIGINAL PORSCHE MOTORSPORT RS OEM PART. LIGHTWEIGHT BILLET ALUMINUM ALLOY - MIL-SPEC.
    £159.98 inc VAT £133.32 ex VAT
  • Semi Solid Engine Mountings All 964 993 996 997 Turbo GT3 Boxster & Cayman Pair

    SKU:SR135

    In Stock In Stock
    By using computer engineering and digital design STOMSKI RACING has developed the FIRST truly symmetrical 911 Semi-Solid Engine/Transmission Mount, thus allowing you to run stiffer mounts without sacrificing comfort or ride quality.  Our symmetrical design allows you to custom tune your ride- determining feel, function, and fun.  Because our SS mounts are SYMMETRICAL, you can now properly use them either as an engine mount OR inverted as a transmission mount on Boxster & Cayman models. Unlike other non-symmetrical SS mounts, there is no compromise when using SR135 inverted as a transmission mount because SR135 is symmetrical and thus FULLY supports and FULLY absorbs in BOTH positions/directions. Road tested and track proven, STOMSKI RACING's SR135 provides better shifting, better weight transfer, better handling, crisper throttle response, better acceleration, and of course GREAT looks, without any loss of comfort.  Mounting  comes complete with an  aluminium housing, stainless steel sleeve and disks spacers & a M12 Schnorr washer. Sold as 1 Pair (2x Mountings)
    £399.98 inc VAT £333.32 ex VAT
  • Service Kit 993 OEM Porsche All Models 1994-1998

    SKU:5777

    3-5 Days To Order By Request (5+ days)
    Original Porsche Service Kit
    £239.99 inc VAT £199.99 ex VAT
  • Service Kit All 993 Models 1994-1998

    SKU:1835

    In Stock In Stock
    with Original Manufacturer Parts
    £179.99 inc VAT £149.99 ex VAT
  • Set Of Race Spec Delivar Head Bolts for all 911 964 993 & 930 Turbo 1965-1998

    SKU:18228

    3-5 Days To Order By Request (5+ days)
    Full Set of 24 Race Spec Studs for All Models 1965 -1998
    £839.99 inc VAT £699.99 ex VAT
  • Short Through Bolt for Crank Case 964 993 / 997 & 997 Turbo GT3 991Cup 1989-2012

    SKU:964.101.174.00

    In Stock In Stock
    Shorter Through Bolt. Sold Each. 2 per car
    £29.99 inc VAT £24.99 ex VAT
  • Sill & wing Oil Pipe Clamp Rubber Support for all 911 & 930 Turbo Cooler Pipes

    SKU:911.207.302.00

    In Stock In Stock
    £9.98 inc VAT £8.32 ex VAT
  • SPARK PLUG HOLE REPAIR KIT All Models 1965-Onwards

    SKU:SR130

    In Stock In Stock
    Stripped spark plug threads in a 911 head usually means one of two things a compromised repair or an engine drop to do it properly. Until now. STOMSKI RACINGs new 911 Spark Plug Hole Repair Kit allows you to either accurately chase the threads of the damaged head, or if necessary, effectuate a complete fix by installing a Time-Sert (or Big-Sert). Our new digitally designed and CNC machined jig mounts over two of the valve cover studs, and when locked down with the included thumb screws, allows Time-Sert reamers, chasers, taps, and setters to be precisely aligned by way of the jigs guide tube and custom tap driver all while the engine is still in the car. SR130 is for use with the Stomski; TS4412E, ( M14x1.25 TimeSert Kit).
    £239.99 inc VAT £199.99 ex VAT
  • Sump Plug Magnetic All 924S 944 968 928 911 3.2L 964 993 996 & 997 Turbo & GT3

    SKU:2096

    In Stock In Stock
    OEM Sump Plug With Magnet.
    £14.99 inc VAT £12.49 ex VAT
  • TDC Indicator & Dial Gauge 14mm Thread

    SKU:SR092

    In Stock In Stock
    For engines where you do not have to use a dead-stop TDC Indicator you can use our easy to read, highly accurate TDC Indicator With Travel Gauge to measure the exact position of the piston. Precisely manufactured from 6061 Aluminium and hard-coated for extra wear resistance, these indicators include ASME/ANSI certified travel gauges for proven accuracy.
    £199.98 inc VAT £166.65 ex VAT
  • Turbo Charger Outlet O Ring to Cat Manifold Silencer 993 & 996 inc GT2 1994-2004

    SKU:996.111.217.70

    In Stock In Stock
    Large Compression O Ring on Flange. Not reusable.
    £29.99 inc VAT £24.99 ex VAT
  • Twin Distributor Drive Belt All 964 & 993 inc Turbo & RS 1989-1998

    SKU:1486

    In Stock In Stock
    Serviceable Item, Worth replacing when you get chance.
    £14.99 inc VAT £12.49 ex VAT
  • Valve Seat Exhaust All 911 / 930 Turbo 964 993 1974-1998

    SKU:930.104.335.56

    3-5 Days To Order By Request (5+ days)
    OEM Valve seat for all 3.0/3.2 & 3.6 Models
    £29.99 inc VAT £24.99 ex VAT
  • Valve Springs per pair 993

    SKU:4319

    3-5 Days To Order By Request (5+ days)
    £28.36 inc VAT £23.63 ex VAT
  • VALVE Tappet / back Lash ADJUSTER 911 & 964 & 993 1965-1998

    SKU:SR097

    In Stock In Stock
    The established method of setting valve lash / Tappets with a feeler gauge often provides for a "close enough" result and rarely provides for accurate, consistent, and easy to obtain precision. STOMSKI RACING's new version of an old-standby takes the "feel" out of setting valves and provides absolute precision, speed, ease of use, and consistency. By conveniently mounting a travel indicator over the adjuster of the rocker arm, STOMSKI RACING's 911 Valve Lash Adjuster allows you to quickly and accurately set and confirm the actual valve lash without settling for "close enough" or wondering whether your feel is consistent while trying to contort a feeler gauge into the far reaches of the 911 engine. The SR097 is precision machined from 6061 aluminum and anodized for years of service on all 911 engines including 964s and 993s. Also available are a range of dial indicators including metric, digital, and compact travel indicators for use in restricted areas. Note; Dial Gauge Not Included.
    £149.99 inc VAT £124.99 ex VAT