You have no items in your shopping cart.
Porsche 968 Gaskets & Seals 1992 to 1995
Porsche 968 - Gaskets & Seals - 1992 to 1995
-
Water Take of Gasket from Head 944 S & S2 / 968 16 Valve cars only 1987-1995
SKU:944.104.365.04
In Stock
-
Head Gasket Thicker for Skimmed Heads 944 2.7L & 3.0L S2 / 968 1989-1995
SKU:00825
In Stock
Head gasket only, OEM. Thicker for machined heads on 2.7L & 3.0L models 1989 -1995 -
Thermostat Rubber Seal 924S 944 968 Fits over Thremostat Lip All 1982-1995
SKU:944.106.929.05
In Stock
-
-
-
Cam Shaft Seal 924S / 944 / 968 / 928 Also 944 Upper Balance shaft 1982-1995
SKU:00290
In Stock
OEM Can Seal for all Front Engine cars -
LOCTITE 574 Case Sealent OEM 50ml
SKU:5027
3-5 Days
Loctite 574 is the Porsche preferred sealant for assembling your Porsche engine case. Loctite 574 remains liquid when exposed to air, but cures when confined between mating engine surfaces. -
Cam shaft and Balance shaft Top Hat 1982-1995
SKU:00924
In Stock
This is the part that the Cam shaft and Balance shaft front seal rides on and should be changed each time the seal is replaced ideally. -
-
Oil Pump Drive Gear Crank Top Hat 924S / 944 / 968 All 1984-1995
SKU:00120
In Stock
OEM Porsche Gear -
Porsche Valve Stem Oil Seal 944S & S2 16v 968 928 S4 GT S 32 Valve 87-95 EACH
SKU:2824
In Stock
Priced Each 944 & 968 x16 per car 928 x23 per car -
Porsche Rear Crank Seal 924S 944 S S2 Turbo 968 928 911 Carrera 964 993 78-98
SKU:00289
In Stock
OEM Porsche Rear Crank Seal for All 924S 944 S S2 & Turbo 968 / 928 and all911 SC Carrera 3.0 3.2 & 3.6 Also All 964 / 993 models 1978-1998 (Flywheel End) -
Porsche Power Steering Pump Repair Seal Kit 924S 944 & Turbo 968 928 S 4 964 993
SKU:00354
In Stock
OEM ZF Fits all 924S 944 968 Models with ZF Power Steering Pump. Also Later 928 911 964 / 993 All Models after 1982 -
Inlet Manifold Gasket Porsche 968 3.0 16 Valve 1992-95
SKU:00829
In Stock
One piece inlet manifold gasket. -
Cam / Balance Shaft Top Hat Sleeve 944 / 924S / 928 All
SKU:00966
In Stock
This is the part that the Cam shaft and Balance shaft front seal rides on and should be changed each time the seal is replaced ideally. -
Head Gasket for 944 2.7L & 3.0L S2 / 968 All 1989-1995
SKU:2754
In Stock
OEM Head gasket only for 944S2 / 968 3.0L & 944 2.7L -
Porsche Water Pump Gasket 924 S 944 S S2 Turbo & 968 Club Sport 2.5 2.7 & 3.0
SKU:00285
In Stock
Fits all 924S, 944 & 968 cars 1982 to 1995 -
Engine Front Seal Kit 924S / 944 / 968 Crank & Balance shaft set All 1982-1995
SKU:00294
In Stock
OEM Front Seal Kit. 13+ O rings & Seals for crank & Balance Shafts. -
Head Gasket Set 968 All 1992-95
SKU:00741
3-5 Days
Includes Head Gasket, Inlet manifold gasket, Exhaust manifold gaskets, Rocker cover gasket, valve stem oil seals, water take off gaskets. -
Spark Plug Hole Seal 928 S4 GT & GTS / 944 S & S2 16v / All 968 1987-1995
SKU:928.104.443.08
In Stock
OEM O Ring Seal for all twin cam heads Sold Each (1) x4 on 944 S & S2 & 968 / x8 on 928 S4 & GT / S Models -
-
Oil Cooler Seal & Gasket Kit 924S / 944 / 968 1982-1995
SKU:20284
In Stock
OEM Full Kit with shims & Oil Seals -
-
Down Pipe Gasket 924S / 944 / 968 sold per pair All cars 1982-1995
SKU:00430
In Stock
Two downpipe gaskets for all 924S Models -
Gearbox Output Seal G50 / 968 / 964 / 993 / Boxster 3.2 / 996 All 87-04
SKU:00846
3-5 Days
Seal on output side of gearbox, two per car -
Conversion Bottom End Gasket Set for all 924S 944 & 968 models 1982-1995
SKU:11583
In Stock
OEM Conversion Set for full or Bottom End Rebuilds -
Exhaust Manifold O Ring 944 S & 944S2 16v 968 & 928 S4 GT & GTS 1987-1995
SKU:1084
In Stock
For 16v & 24 Valve cars. OEM Metal O ring. priced each (1) -
Porsche Sump Gasket 924S / 944 S S2 Turbo / 968 Club Sport 1982-1995
SKU:00278
In Stock
Porsche Sump Gasket 924S / 944 S S2 Turbo / 968 Club Sport 1982-1995 -
-
