Porsche 968 Brake Components 1992 to 1995

Replacement set of Big Red Calipers and Brake Pads Set as used on the 993 Turbo & GT2 Can be used for Direct replacements or as part of a Big Brake conversion. Use on Brake Discs Thickness;- 32mm-34mm and Diameters;- 320mm-350mm Standard fit on; 964 Turbo 3.6 993 Turbo & GT2 928 GTS

Replace worn pedal rubbers, Tidys up interior and MOT failure. Sold Each (1) 2 per car

OEM Front Brake Hose. All Models 1976 -1995 exc M030 & Turbo 1989 -On

Fits on Master Cylinder Sold Each ( 2 per car ) All Porsche 3 pin Applications

Electric Switch on Pedal Box

OEM Brake Master with Alloy Body All

OEM Brembo Cap. Sold Each (2 per caliper )

OEM Brembo Nipple. Sold Each (2 per Caliper) All 4 & 6 piston Calipers 1978-Onwards

For All Brake to upright applications Also Brake Brackets.

Priced each (2 per caliper). Can also use on Big Red brake conversions etc

Long Bolt for All Turbo & GT3 Calipers. Also used on Big Red Conversions etc. Priced Each (1)

OEM Caliper Mounting Bolt 40mm Long

OEM Porsche Stainless steel plate

Pivot Mechanism in hub for handbrake

OEM Porsche Cross Drilled ( Handed )

OEM Porsche Cross Drilled ( Handed )

OEM Genuine Porsche Brand

OEM set of 4 pads ( for 1 axle) Applications; Front & Rear for; 930 Turbo 3.3L 1978-1989 / 964 Carrera 2 & C4 1989-1994 / 944 Turbo 1986 -1988 / 944S2 3.0L 1989-1992 & 968 1992-1995 Rear Only For; 928 S2 S4 GT & GTS 1986-1995 / 993 C2/C4 1994-1998 / 944 Turbo 1989 -1992 / 964 Turbo 1991 -1994

Passenger side for Right Hand Drive Cars & Drivers side for Left Hand Drive cars

Drivers side for Right Hand Drive Cars & Passengers side for Left Hand Drive cars

OEM Front Brake hose. All except M030 Calipers.

OEM Shim kit for Brembo Caliper. Set of 4 Anti Squeal Pads Front Caliper, Price per caliper

944 S2, Set of seals for 4 Caliper Pistons. Seals & Dust covers for the front caliper. 1 set per caliper.

Set of 4 Caliper Pistons, Seals & Dust covers for the front caliper. 1 set per caliper. Non M030 Models

Set of 4 Caliper Piston Seals & Dust covers for the front caliper. 1 set per caliper. For Cars with M030 Brakes Note. Dose not include Pistons

OEM German Front Pads 944 Turbo 1989-1992 928 S2 S4 & GT 1986-1992 964 Turbo All 993 C2/C4

OEM Porsche OE Front Pads 944 Turbo 1989-1992 928 S2 S4 & GT 1986-1992 964 Turbo All 993 C2/C4

Fits; 964 Turbo 3.6L 928 GTS 993 Turbo / C4S & RS

OEM Spring Sold Each ( 2 per car )

Fits between the cable and rear Hub

For All 924S 994 & 968 Models 1986 -Onwards, Long cable from handbrake lever to passenger side wheel.

For All 924S 944 & 968 Models 1986 -Onwards, Short cable from the middle of long cable to drivers side wheel

OEM Porsche Pivot Mechanism in hub for handbrake

Lower Spring All Models Sold Each

Springs that hold the handbrake shoes to the backing. For 924 Turbo & 924S Models. 4 per Car

OEM Set of four hand brake shoes All Models 1965 -2012 .Inc 2.9L 3.2L & 3.4L Boxster /S Cayman /S & 911/930 Turbo Models

3 per backing , For Front & Rear

Popular For Front & Rear Back Plates & Belt Covers & Other applications

Made of high quality materials, Performance Friction mechanic gloves are the same design and quality as the ones used by top race professionals around the world.FreeFlex Airprene material, tough Spandex top material. 3mm impact absorbing gel padding, hidden seams and snug fit. Available in S, M, L, XL and XXL

These Bottles are produced with high quality temperature resistant materials to withstand Vigorous use in motorsport applications. The bottle and hoses are designed to allow bleeding of a hot brake system between sessions or stages. Calipers with twin bleed nipples can be bled individually or simultaneously as each bottle is equipped with twin bleed hoses and one way valves to prevent air being drawn back into the caliper during bleeding. Each hose has a clear section of hose so that any air bubbles can be monitered during the bleeding operation. This hose is then attached to a small bore silicone hose to connect to PFC size bleed nipples but this will also fit standard size nipples as well . The bottle has almost a 1ltr capacity to reduce the need to empty the bottles during bleeding. On the neck of the bottle there is a convenient storage to store bleed hoses and this also acts as a hanger for the bottle during bleeding.

Pivot Pin for the Mechanism in hub for handbrake

OEM. Alloy Sold Each. Not Handed

OEM Rear Brake Hose for All Models.

Set of 4 Caliper Pistons, Seals & Dust covers for the front caliper. 1 set per caliper

OEM German Disc For 964 Carrera 2 & C4, All 968 & 944 Turbo & 3.0L S2 Models 1987 onwards. Priced each

OEM Brembo Caliper. Priced for a Set of Four, 2 sets required to do the whole Rear

Set of 4 Braided Hoses give a superbly firm & controllable brake pedal