You have no items in your shopping cart.
Porsche 924 Engine Components 1976 to 1989
Porsche 924 - Engine Components - 1976 to 1989
-
Airbox Rubber Strap 924 Turbo / Carrera GT & All 928 1977-1995
SKU:928.110.363.01
In Stock
OEM Rubber Strap -
ARP Big End Nuts & Bolt Kit 924S 944 968 & 928 1977-1995
SKU:17791
3-5 Days
Race Quality Big End Nut & Bolt Kit for All Models inc Turbo. Note for 928 Models please order 2 sets -
Autoglym Engine & Machine Cleaner
SKU:1109
In Stock
A powerful, non-corrosive, multi - surface cleaner for engines, components, wheels & machinery -
Balance Shaft Bearing Front ( each ) 1 per shaft
SKU:8158
3-5 Days
OE manufacturer Glyco. 1 per shaft, 2 per car -
Balance Shaft Bearing Rear ( each ) 2 per shaft
SKU:8157
In Stock
OE manufacturer Glyco. 2 per shaft, 4 per car -
Billet Engine Mounting Uprated 924 2.0L 924 Turbo & Carrera GT 1976-1985 (Each)
SKU:POR174M
3-5 Days
Race Spec Heat resistant Billet Mounting. Anti Vibration. Fits both sides. priced each -
Cam / Balance Shaft Top Hat Sleeve 944 / 924S / 928 All
SKU:00966
In Stock
This is the part that the Cam shaft and Balance shaft front seal rides on and should be changed each time the seal is replaced ideally. -
Cam Belt & Tensioner Pulley Service Kit 924 2.0L & 924 Turbo 1976-1985
SKU:FEB14574
In Stock
OEM German Kit For All 924 2.0 & 924 Turbo Models. Includes cam belt & cam belt tensioner -
Cam Belt 924 2.0L & 924 Turbo / Carrera GT 1976-1985
SKU:00226
In Stock
OEM German made For 924 & 924 Turbo & Carrera GT 2.0L Models -
Cam Belt 924S & 944 8 Valve & 944 Turbo 1982-1992
SKU:00233
In Stock
OEM Cam Belt For All 8 Valve 924S & 944's Inc 944 Turbo Models -
Cam Belt Tensioner All 924 & 924 Turbo 1976-1985
SKU:00231
In Stock
OEM Part For 924 & 924 Turbo / Carrera GT Models. Recomended when changing cam belt or Water Pump & engine re builds. -
-
-
Cam Follower Bucket 924 2.0 & 924 Turbo / Carrera GT 1976-1985
SKU:4248
3-5 Days
OEM Porsche Item. Sold each (1) 8 per car -
-
Cam shaft and Balance shaft Top Hat 1982-1995
SKU:00924
In Stock
This is the part that the Cam shaft and Balance shaft front seal rides on and should be changed each time the seal is replaced ideally. -
Cam Shaft Drive Pulley 924 2.0L 924 Turbo & Carrera GT 1976-1985
SKU:18211
In Stock
OEM Cam Pulley. Improves Belt Life. -
Cold Start Injector 924 2.0L & 924 Turbo / Carrera GT 1976-1985
SKU:00305
3-5 Days
OEM Porsche. Also replace with Hot Start Issues -
-
Con Rod Nuts 944 924S 928 968 EACH
SKU:00923
3-5 Days
8 per car ( 944 924S 968 ) 16 per car ( 928 ), priced each -
Copper Nuts for Exhaust Manfold Studs M8
SKU:999.084.611.02
In Stock
OEM M8 nut for All Exhaust applications. -
Core Plug Large 924 / 924 Turbo 1976-1985 Cayenne 2003-Onwards
SKU:18130
In Stock
OEM Core Plug for Engine Block -
-
Crankcase Breather 924 & 924 Turbo / Carrera GT 1979-1985
SKU:8172
In Stock
Breather in Crankcase, for 924 Standard after 1980 & All 924 Turbo Models -
Crankcase Breather 924 1976-1981 ( Not Turbo or Carrera GT )
SKU:8171
In Stock
Breather in Crankcase, for 924 Standard Models upto 1981 -
Cylinder Head Nut 924S / 944 / 968 & 928 1977-1995
SKU:999.076.043.02
3-5 Days
OEM Head Nut All Models. -
Cylinder Head Studs 924S 944 968 1982-1995
SKU:944.101.197.00
3-5 Days
OEM Porsche Head Stud in Block -
Engine Mounting All 924S 944 & 968 Models including Turbo & Cabriolet 1982-1995
SKU:00115
In Stock
OEM German Mounting. These are the Uprated Turbo Type Mounts which are a direct fit for all models. Sold Each (1) Not Handed. -
-
Engine Oil Pump All 924S 944 & 968 Models 1982-1995
SKU:00112
In Stock
OEM Porsche Part. Recommended on Full Engine Rebuilds -
EuroCupGT Crank Case Breather ( K&N Type ) Chrome top 10-15mm inlet
SKU:11188
In Stock
Small Cotton Gauze Filter ideal for Crank case Breather & air intake bypass pipes. aprox 40mmx50mm with small rubber inlet 10mm -15mm pipe. -
Exhaust & Inlet Manifold Studs Sold Each (1) All Models 1965-Onwards
SKU:00118
In Stock
Priced each (1). For cars 4 cyl =8 / 6 cyl =12 / 8 cyl = 16 -
-
Exhaust Valve Guide 924 2.0L Standard 1976-1985 ( Not Turbo ) Each
SKU:00083
In Stock
Priced each, 4 per car -
Flywheel Bolt 911 930 Turbo 924S 944 & Turbo 968 964 993 996 / 997 GT3 1978-2012
SKU:7584
In Stock
OEM Single Mass Flywheel Bolt. Sold Each 9 per car ( M10x1.25x20mm ) Inc Club Sport, RS & GT3 Cup Models -
-
Fuel Filter Union For 911 1974-1981 & 924 1976-1982
SKU:930.110.199.00
In Stock
Allows retro fitment of later Bosch filter onto early cars -
Fuel Injection Metering Head 924 2.0L includes surcharge of £75.00 1976-1985
SKU:00308
In Stock
Price includes a fully refundable surcharge of £75.00 -
Fuel Metering Head 924 Turbo & Carrera GT includes surcharge of £75.00 1979-1985
SKU:00309
In Stock
OEM Bosch Unit. Price includes a fully refundable surcharge of £75.00 -
Fuel Pressure Damper 924S 944 8 Valve & 944 Turbo 1982-1992
SKU:7563
3-5 Days
On the Front of the Fuel Rail, For 944 8 valve Models upto 1989 & All Turbo Models 1986 to 1992 , Not for 2.7 Models -
Fuel Pump Fuel Filter Air Box & Oil Cooler Rubber Mount All Models 1965-1998
SKU:944.610.115.00
In Stock
OEM Rubber Cotton Real Mount with M6 threaded ends for Fuel Pump, Fuel Filter, Oil Cooler, Air Box & Header Tanks etc. Popular on many applications -
-
Head Gasket Set 924 2.0L 1976-1985 ( Recommend Head Bolts )
SKU:00245
In Stock
OEM Kit. Porsche Recommend Head Bolts as they are stretch bolts. -
Inlet & Exhaust Valve Guide 924 Turbo 1979-1984 Sold Each (1)
SKU:00084
In Stock
OEM Bronz Guide. Priced each, (4 per car) -
-
-
Inlet Valve 924S / 944 2.5 8v ( not Turbo ) 1982-88
SKU:00104
3-5 Days
For 924S Models. Priced each, 4 per car -
K&N Air Filter 3-5bhp All 924S & 944 8 Valve cars 2.5L & 2.7L
SKU:1577
In Stock
Offers increased Air flow & throttle response, Replaces paper filter & is washable.Fits standard Porsche 924S & 944 8 Valve cars ( Not Turbo S or S2 16 valve ) -
K&N Air Filter 924 Turbo / Carrera GT 3-5bhp 1979-1985
SKU:1574
In Stock
Offers increased Air flow & throttle response, Replaces paper filter & is washable.Fits Porsche 924 Turbo -
K&N Air Filter Porsche 924 2.0L 1976-1985
SKU:1573
In Stock
Offers increased Air flow & throttle response, Replaces paper filter & is washable. Fits standard Porsche 924 -
-
LOCTITE 574 Case Sealent OEM 50ml
SKU:5027
In Stock
Loctite 574 is the Porsche preferred sealant for assembling your Porsche engine case. Loctite 574 remains liquid when exposed to air, but cures when confined between mating engine surfaces. -
M10 Studs for All Turbo & Exhaust down pipe & 911 Crank Case Rear Support
SKU:900.081.052.02
In Stock
Large Stud for Turbo mounting & engine Mounting -
Main Bearing Set All 924S 944 968 & 928 1977-1995
SKU:00111
In Stock
Full Set OEM Standard size Bearing inc thrust bearing, Please call for oversize if required -
-
OEM Piston Ring Compressor for All 911 964 993 924 944 928 & 968 models 1965-98
SKU:18806
3-5 Days
Adjustable for all Piston Sizes and can be un locked once the barrel is pushed over the piston rings. -
-
Oil Filler Cap 924 & 924 Turbo 1976-1985 ( Not 924S )
SKU:00099
In Stock
OEM Oil Rocker Cover Cap on Engine. All 2.0L cars -
-
-
-
Oil Pressure Switch / Sender Unit 924S 944 968 928 964 & 993 1977-1998
SKU:00114
In Stock
OEM German Oil Sender Unit for All Models 1977 -1998 -
Oil Pump Drive Gear All 924S 944 & 968 Porsche models 2.5 2.7 & 3.0 1982-95
SKU:00949
In Stock
OEM Gear Runs on Seal. A must if you are re doing front engine seals or an engine rebuild. -
Oil Pump Drive Gear Crank Top Hat 924S / 944 / 968 All 1984-1995
SKU:00120
In Stock
OEM Porsche Gear -
Oil Pump Gasket Porsche 924 & 924 Turbo / Carrera GT 1976-1985
SKU:046.115.189.A
In Stock
Discontinued by Porsche, these are high quality Gaskets using modern waxed materials. -
-
Piston Ring Set 924 2.0L 1976-1985 ( 3 rings for 1 Piston )
SKU:00075
3-5 Days
Priced each piston set, (4 sets per car) -
Piston Ring Set 924 Turbo 1979-1983
SKU:00076
In Stock
Priced each, 4 sets per car. 924 Turbo 2.0L Only -
Piston Ring Set 924S / 944 2.5L 1982-1989
SKU:00103
In Stock
OE Manufacturer Goetze , Priced each, (4 sets per car) -
-
-
Porsche 924 Head Bolts ( set of 10 ) Stretch for Head Gasket change 1976-1985
SKU:00087
In Stock
Stretch bolts, must be changed when changing your Head Gasket ( sold as a set of 10 ) -
Porsche 924 Turbo Head Gasket Set 1979-1985 Also 924 Carrera GT GTS GTR 82-85
SKU:00246
3-5 Days
Porsche 924 Turbo Head Gasket Set 1979-1985 -
Porsche Big End Bearings Set 924 2.0 / 924 Turbo 1976-1985 Standard size Audi VW
SKU:00089
In Stock
Porsche Big End Bearings Set 924 2.0 / 924 Turbo 1976-1985 Standard size Audi VW -
Porsche Big End Engine Bearing Set STD size All 924S 944 & 968 1982 to 1995
SKU:00110
In Stock
OEM Full Set of Standard Size Big End Con rod bearings. Note For oversize please call first. -
Porsche OE Oil Tank Filler Cap 924S 944 S2 Turbo 968 911 964 993 1982-1998 RS
SKU:00117
In Stock
Genuine OE Porsche Oil Tank Filler Cap 924S 944 968 911 964 993 1982-1998 -
-
Rotor Arm 924S / 944 / 944 Turbo 1982-1992 & 928 S2 1984-1986
SKU:2157
In Stock
OEM part For all 8 valve 924S 944 2.5 & 2.7 Models inc 944 Turbo & 928 S2 5.7L Note. 928S2 uses x2 units -
-
Spark Plug 924 Turbo / 911 930 Turbo & 965 3.3L Turbo 1974-1992
SKU:00914
3-5 Days
For 2.0L Turbo and 3.0L & 3.3L Turbo cars ( not 3.6 turbo ) -
-
Sump Plug Magnetic All 924S 944 968 928 911 3.2L 964 993 996 & 997 Turbo & GT3
SKU:2096
In Stock
OEM Sump Plug With Magnet. -
Throttle Body to Inlet Manifold Gasket 924 & 924 Turbo 1976-1985
SKU:00253
In Stock
Fits both Standard and Large Throttle body Kits -
Throttle Cable 924 RHD 1976-85 ( Not Turbo or 924S )
SKU:7290
3-5 Days
Cable from accelerator pedal to Throttle Body , Manual cars only -
Turbo Charger M10 Nut 911 / 930 964 & 924 Turbo 1974-1994
SKU:900.910.099.02
In Stock
Sold Each, 4 per flange Large Nut -
-
-
-
-
Valve Springs 924S 944 8v & Turbo 1982-1992 ( per pair ) not 16v ( S or S2 )
SKU:00107
In Stock
Pair of Valve springs for one valve, 8 per car -
-
Warm Up Regulator 924 2.0L 1976-1985 ( Not Turbo )
SKU:00301
3-5 Days
Core Unit surcharge of £50.00 with order, refunded on return of old unit. -
Warm Up Regulator 924 Tbo (price includes surcharge of £50.00)
SKU:00302
3-5 Days
OEM Bosch reconditioned Unit. Core charge of £50.00 charged with order, refunded on return of old unit -
Wastegate 924 Turbo 911 Turbo 74-89
SKU:4132
3-5 Days
Accurate boost control with a high quality appearance. These highly finished wastegates are constructed with a stainless steel mounting base, valve seat & hardwear, 1 Bar Boost spring with high temperature resistant diaphragm utilizing a 38mm valves to support up to 450 Bhp applications -
Water Pump 924S & 944 1982-1989 ( not 3.0 S2 or Turbo )
SKU:00062
In Stock
For All 2.5 Models ( not 3.0 S2 or Turbo ) -
