You have no items in your shopping cart.
Porsche 911 Suspension 1963 to 1989
Porsche 911 - Suspension - 1963 to 1989
-
911 R / ST / RS / RSR Front Strut brace brackets inc bolts & spacers 1965-1989
SKU:ST911R-Front Strut brace brackets
In Stock
-
911 R / ST / RS / RSR Rear shock tower support brackets 1965-1989 (Two pairs)
SKU:ST911R-Rear shock tower brackets
In Stock
911 R / ST / RS / RSR Rear shock tower support brackets ready to weld on to the Rear shock towers. Made from an original pattern but contoured for better fitment. Each set will need a slight tweek to match the location as all early 911's are hand made so no two cars are the same. Set comes as 4 parts (Two pairs / 1 car) -
Cotter Pin Front Ball Joint to suspension Leg 911 912 914 & 930 Turbo 1969-1989
SKU:2839
In Stock
OEM Pin. Secures lower ball joint to suspension leg. Sold Each (1) Two per car -
EuroCupGT-Pro C Spanner for 2 1/2" 63mm for Porsche Bilstein Suspension Rings
SKU:18947
In Stock
2 1/2-INCH (63MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
EuroCupGT-Pro C Spanner for 2 1/4" 57mm for Porsche & Bilstein Suspension Rings
SKU:18948
In Stock
2 1/4-INCH (57MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
Front Anti Roll Bar Bush inner Clamp All 911 912 & 930 Turbo 1969-1989
SKU:911.343.775.00
To Order By Request (5+ days)
OEM Porsche bracket on front Subframe. All Models -
Front Koni Classic Shock Absorbers for Koni Cases 1969-1977
SKU:2622
To Order By Request (5+ days)
Front Koni Classic Red insert to fit Porsche 911 (G series) including Carrera RS -
Front Lower Ball Joint 911 912 & 914 1969-1971 Only
SKU:11995
In Stock
For Early Long Wheel Base 2.0L & 2.2L cars only -
-
-
-
Front Lower Wishbone A Arm Left Side All 911 912 & 930 Turbo 1974-1989
SKU:5058
To Order By Request (5+ days)
OEM Quality Left Side -
Front Lower Wishbone A Arm Right Side All 911 912 & 930 Turbo 1974-1989
SKU:00827
In Stock
OEM Quality Right Side -
Front Suspension Damper Shroud for All 911 912 & 930 Turbo 1965-1989
SKU:19010
To Order By Request (5+ days)
OEM Porsche part -
Front Suspension Top Mount All 911 912 & 930 Turbo 1969-1989 ( Not Handed )
SKU:911.341.018.00
To Order By Request (5+ days)
OEM German Front Top Mount ( Not Handed ) -
-
Front Wishbone Bush ( Front ) 911 912 & 914 1965-1969 ( Short Wheel Base )
SKU:18480
To Order By Request (5+ days)
Only for really Early cars pre 1970 -
Koni Sport Adjustable Rear Shocks ( Yellow ) All Models 1973-1989 (Pair)
SKU:18525
In Stock
Fully Adjustable Rear Kit. Ideal for Fast Road & Motorsport use. ( Pair ) -
Koni Top Adjustable Sports Shocks for Boge Cases 911 & 930 Turbo 1973-1989 (2)
SKU:18526
In Stock
Sports Top Adjustable Front Inserts Kit for ( Black ) Boge Cases. Ideal for Fast Road & Motorsport applications. Pair (2) All cars 1974 -Onwasrds with Boge Legs -
M10 Flang Nut For Suspension All Models 1965-Onwards
SKU:999.076.053.01
In Stock
OEM Porsche Flange Nut For All Suspension, Engine, Chassis & Gearbox applications -
M6 Stainless Bolts All Brake Backing Plates & cam Belt Covers etc ( set of 4 )
SKU:8209
In Stock
Popular For Front & Rear Back Plates & Belt Covers & Other applications -
OEM Bilstein Green Front Leg (Complete) 1972-1989
SKU:00826
To Order By Request (5+ days)
OEM Replacement full leg unit. Note. Please specify Year & Model when ordering. -
OEM Bilstein Green Front Legs All 911 SC Super Sport & 930 Turbo 1972-1989 (Pair
SKU:5055
To Order By Request (5+ days)
Complete replacement OEM Front Leg Set of two (2) units to update or replace worn units. Ideal as a Bolt on Direct replacement on all 911 & 930 Turbo models, or use for Fast Road, Historic Motorsports or classic restoration. 1972 -1989 -
OEM Bilstein Rear Shock Absorber Unit for All 911 & 930 Turbo models 1972-1989
SKU:2628
In Stock
OEM on most 930 Turbo's 911SC Sport & Carrera Super Sport Models. Ideal upgrade for all cars. 25% stiffer than your Black Boge Units. Fits All Models 1972 -1989. Sold Each ( Not Handed ) -
OEM Front Bilstein Front Insert for Black Boge Cases 1969-1989 ( Each )
SKU:2599
In Stock
Complete OEM Bilstein Insert for Black Boge Cases to turn standard front legs into Sports Model Dampers. Sold Each ( 2 per car ) -
OEM Front Damper for Boge Case All 911 & 930 Turbo 1986-1898 ( For Black Cases )
SKU:2621
In Stock
OEM Damper For All 911 models with Black Outer Case. Direct replacement Sealed Unit. -
OEM Front Damper for Boge Case All 911 1969-1985 ( For Black Cases )
SKU:2620
In Stock
OEM Damper For All 911 models with Black Outer Case. Direct replacement Sealed Unit. -
OEM Front Shock Insert All Green Bilstein 911/ SC Sport & 930 Turbo 1974-1989
SKU:2619
To Order By Request (5+ days)
OEM on all 911 SC Sport / Carrera Super Sport & Turbo models. Direct replacement sealed High Pressure Gas insert for all Green front suspension Cases. Sold Each ( Not Handed ) -
Polyurethane Front Wishbone Bush 911& 930 Turbo 1969-1989 (Pack of 4)
SKU:2138
In Stock
Polyurethane front wishbone bush to fit models 911 up to 1989. Price per set of 4 bushes. -
Rear Anti-Roll Mount on Body ( Weld On ) 911 & 930 Turbo 1965-1989 (not handed)
SKU:911.501.983.00
In Stock
For All Models 1965 to 1989 inc Turbo. Often corrodes causing MOT Failure -
Rear inner Trailing Arm Bush Kit All 911 & 930 Turbo 1969-1989 (pair)
SKU:5057
In Stock
OEM Ouality 2x Bushes for one (1) rear arm. Note. Two kits needed per car -
Rear Koni Classic Orange Shock Absorber 1969-1989 ( Each )
SKU:2630
To Order By Request (5+ days)
Direct Replacement Rear Koni Classic Red insert to fit Porsche 911 including Carrera & Turbo 1969 to 1989 OEM fitment On some Early 2.4 2.7 & 3.0 Models -
-
-
Rear Torsion Bar Main Cover 911 912 & 930 Turbo 1965-1989 ( Not Handed )
SKU:1568
In Stock
OEM Galvanised Plate Against inner wing & spring plate 4 holes -
RSR/ST Adjustable Torsion Bar Spring Plates 911 & 912 Short Wheelbase 1965-1968
SKU:19665
To Order By Request (5+ days)
These High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of the era . Direct replacement Bolt On fit for All Short Wheel Base 911 / 912 models 1965 -1968 Only. Gives simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. Not for Later cars from 1969-1989. Please see other listing in this section. -
RSR/ST Adjustable Torsion Bar Spring Plates 911 G50 1987-1989 & Turbo 1989 Only
SKU:19663
To Order By Request (5+ days)
These High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of that era . Direct replacement Bolt On fit for Later G50 911's 1987-Onwards & 930 Turbo 1989 Only. Simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. For Earlier 911 912 & 930 Turbo Models Please see other listing in this section. -
RSR/ST Adjustable Torsion Bar Spring Plates All 1969-1986 & 930 Turbo Upto-1988
SKU:19662
In Stock
These High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of the era . Direct replacement Bolt On fit for All 911 / 912 & 930 Turbo models 1969-Onwards. Gives simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. Not for Later G50 Gearbox cars from 1987 -1989. Please see other listing in this section. -
Spax 911 / 912 Front Damper Inserts for Black Boge Strut 1969-1973 (pair)
SKU:7507
To Order By Request (5+ days)
For 911 Models 1969 to 1973.Can be adjusted for stiffness, Controling stiffness allows you to alter the suspension set up to suit your style of driving. -
Spax Adjustable Rear Shock Absorber 911 1974-1989 ( sold per Pair)
SKU:7516
To Order By Request (5+ days)
For 911 Models 1969 to 1989 .Can be adjusted for stiffness, with no dismantling. Controling stiffness, allows you to alter the suspension set up to suit your style of driving. Note. Please use Vehicle Year & Model Drop Downs when checking out. -
Spax Adjustable Rear Shock Absorber All Classic 911 & 912 1965-1973 ( per Pair)
SKU:7523
In Stock
For 911 Models 1968-1975. Can be adjusted for stiffness, with no dismantling. Controling stiffness, allows you to alter the suspension set up to suit your style of driving. Note. Please use Vehicle Year & Model Drop Downs when checking out. -
Spax Front Damper Inserts for Black Boge Strut 911 & 930 Turbo 1974-1989 (pair)
SKU:7508
To Order By Request (5+ days)
For All 911 & 930 Turbo Models using the Black Boge Struts. 1974 to 1989 . Can be adjusted for stiffness, Controling stiffness allows you to alter the suspension set up to suit your style of driving. -
Steering Column Support Needle Roller Bearing & Bush All Models 1965-1989
SKU:911.347.029.00
To Order By Request (5+ days)
OEM Steering Column Bush with Bearing ( Complete ) -
Stomski Racing RSR Rear Suspension Monoball Inner Arm Bush Kit 1965 to 1989
SKU:SR018
In Stock
Now your suspension settings on the rear of your 911 can be set with greater ease and stay true and accurate. These monoballs and cartridges replace the worn, imprecise factory rubber bushings on 911 1965 through to 1989. Precisely machined from stainless steel and 6061 aluminium with the finest aerospace monoballs available. 1 Side per kit. ( x2 required for an Axle / Car ) -
Suspension & Steering Nut for Wishbone Camber Toe & Track Rod control Ends
SKU:999.084.445.09
In Stock
-
Uprated 21mm RSR/ST Front Torsion Bars All 911 & 912 & 930 Turbo 1965-1989
SKU:19669
To Order By Request (5+ days)
+2mm Diameter Larger than Standard -
Uprated 23mm RSR/ST Front Torsion Bars All 911 & 912 & 930 Turbo 1965-1989
SKU:19670
To Order By Request (5+ days)
+4mm Diameter Larger than Standard -
Uprated 26mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988
SKU:19668
To Order By Request (5+ days)
Uprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards -
Uprated 28mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988
SKU:19667
To Order By Request (5+ days)
Uprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards -
Uprated 30mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988
SKU:19664
To Order By Request (5+ days)
Uprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards -
Uprated 30mm RSR/ST Rear Torsion Bars 911 G50 1987-1989 & 930 Turbo 1989 Only
SKU:19666
In Stock
Uprated Rear Torsion Bars for All G50 Cars 1987-Onwards
