You have no items in your shopping cart.
Porsche 911 Exhaust Parts 1975 to 1983
Porsche 911 - Exhaust Parts - 1975 to 1983
-
-
-
911 Heater Hose Clip 60-80mm Sold Per Pair (2) 1965-1989
SKU:2949
In Stock
A Pair of Heater Hose Clips to be used in conjunction with 911 Carrera High temperature thermal heater hose ( sold per pair ) -
911 Rear Silencer Gasket All 911 SC & Carrera 1974-1989 ( Not Turbo )
SKU:2957
In Stock
OEM Gasket for All 1-in / 1-out rear silencers 1974 -1989 -
911 SC & Carrera Exhaust Gasket Nut & Bolt Fitting Kit All 2.7L 3.0L 3.2L 74-89
SKU:PCG.911.211.00
In Stock
Fits all None Turbo models 1976-Onwards -
930 & 964 Turbo Exhaust Manifold to Turbo Gasket 1974-1994
SKU:18165
In Stock
OEM Stainless Steel gasket between Exhaust Manifold & Turbo Charger Unit. -
Cross Over Pipe Clamp Kit All Models 1974-1989
SKU:911XKIT
In Stock
OEM Full Clamp Kit for joining the short & long section of the Cross over pipes. Kit contains 2 clamp halves , the seal & washer. -
Cross Over Pipe M Steel 2 piece
SKU:3215
In Stock
Cross over pipe in 2 sections, so can be fitted without removing Heat exchanger. In Mild Steel -
Cross Over Pipe Stainless Steel 1 piece All Models 1974-1989
SKU:00983
In Stock
Polished Stainless Steel Cross over pipe in one whole piece. -
Cross Over Pipe Stainless Steel All 911 / 930 Turbo 1977-1989
SKU:00520
In Stock
Heat Exchanger Cross Over pipe. an be fitted without removing Heat exchanger. In Stainless Steel -
Engine Bay Heater & Fan Ducting 60mm All 911 & 930 Turbo 1965-1989
SKU:911.211.522.01
In Stock
OEM Porsche Ducting for Engine Bay 60mm x 1000mm Note. Can be used for most heater & heating applications -
Exhaust & Inlet Manifold Studs Sold Each (1) All Models 1965-Onwards
SKU:00118
In Stock
Priced each (1). For cars 4 cyl =8 / 6 cyl =12 / 8 cyl = 16 -
Exhaust Gasket Set 911 / 930 Turbo 1974-1989
SKU:4396
In Stock
OEM Gasket Set For All 911 Turbo models 3.0L & 3.3L Includes Heat Exchanger to head Gaskets, Waste Gate & Turbo Gasket -
Exhaust Gasket Set 911 2.7 & 3.0 SC Carrera 1975-1983
SKU:4379
In Stock
OEM Gasket Set, Contains 6x head to heat exhanger gaskets, 2x heat exchanger to cross over pipe / pre silencer & 1x heat exchanger to pre silencer & 1x plus rear box gasket. -
-
-
-
Heat Exchanger 2.7L & 3.0L SC Mild Steel Galv 1975-1983 Each ( Not handed )
SKU:4373
To Order By Request (5+ days)
Heat Exchangers in painted Steel for 911 2.7 & 3.0 inc 911 SC from 1975 to 1983. Fits Left or Right.(Made by Dansk) -
Heat Exchanger 911 Stainless Steel All 2.7 & 3.0SC 1975-1983 ( Not Handed )
SKU:00440
In Stock
Polished Heat Exchangers in Staniless Steel for 911 2.7 & 3.0 inc 911 SC from 1975 to 1983. Fits Left or Right. Made by Dansk. ( Not Handed ) -
Heat Exchanger Nuts Allen Hex Head All models 1965-Onwards M8x1.25mm
SKU:2964
In Stock
6 -12 per car , Priced each (1) -
Heater Control Valve 911 / 930 Turbo Left Side 1965-1986
SKU:2946
In Stock
Passenger Side for Right Hand Drive cars & Drivers side for Left Hand Drive cars. Made by Dansk -
Heater Control Valve 911 / 930 Turbo Right Side 1965-1986
SKU:7623
In Stock
Drivers Side for Right Hand Drive cars & Passenger side for Left Hand Drive cars. Made by Dansk -
-
-
-
-
-
Porsche 911 Carrera Orange Heater Hose fits 930 Turbo SC Carrera Targa & 914 etc
SKU:4398
In Stock
Sold in foot lenghts but sent as whole length ordered. ie if you order 3 ft you get 3ft lenght not 3 x 1ft lenghts -
-
Pre Silencer in Polished Stainless Steel All 911 / Carrera & SC 1975-1989
SKU:00669
In Stock
Stainless Steel Pre Silencer -
Rear Box 911 1 in 1 out Standard Stainless Steel Painted All 1976-1989
SKU:00759
In Stock
Painted Stainless Steel. For All Models 1974-89 inc SC & Carrera. Made by Dansk -
Rear Box 911 Standard 60mm outlet Stainless Steel Polished 1975-1989
SKU:00194
In Stock
Polished Stainless Steel, For All Models 1974-89 inc SC & Carrera. Made by Dansk -
Rear Exhaust Silencer Box Strap All 911 & 911SC Models 1965-1983
SKU:4372
In Stock
OEM Stainless Steel Strap. Priced each, (two per car). Note. Not for Turbo or 3.2L Carrera models. -
Rear Silencer Box Aluminised All 911 / Carrera models 1974-1989
SKU:4377
In Stock
For 2.7, 3.0 inc SC & 3.2 Carrera Models 1975 to 1989 , 1 inlet & 1 outlet. In aluminised Steel. Made by Dansk -
RSR style Racing Header manifolds for All 911 None Turbo models 1965-1989 (Pair)
SKU:18711
In Stock
Racing style R ST & RSR headers. Bolts directly to Rear silencer. Ideal for all Road Track & Rally applications not requiring a driver / cabin heater system. Pair (2) -
Side Pipe Polished Stainless For 930 Turbo & Wastegate 1974-1994
SKU:4394
To Order By Request (5+ days)
High quality 304 Stainless Steel. Can be supplied in painted finish for OEM Look. Can also be adapted for 964 Turbo 3.3 & 3.6L -
Wiper Arm Flange Lock Nut Also for All Exhausts & 911 Engine case (Sold Each)
SKU:N.011.008.8
In Stock
Size M8 (13mm)
