You have no items in your shopping cart.
Porsche 911 Clutch & Flywheel Parts 1963 to 1989
Porsche 911 - Clutch & Flywheel Parts - 1963 to 1989
-
-
911 Clutch Cable Clevis Fork for Pedal End 1965-89 inc 356 & 914
SKU:12254
In Stock
For All 911 & 914 Clutch cables at Pedal end 1965 -1986 -
911 G50 Billet Aluminium Solid Transaxle Mount Kit G50 & Turbo & 964 1978-1991
SKU:SR017
In Stock
These mounts are machined to exacting tolerances from premium grade billet aluminum. Uniquely designed for the 930 G50 transmissions, these high quality mounts provide for easy installation using your existing transaxle support assembly. Simply press the rubber factory mounts from the transaxle support assembly and slip these two-piece mounts in place. Anodized for years of service. as 1 Pair (2x Mountings) -
Aasco Flywheel 911 SC 1978-1983 9 Bolt
SKU:106408.12
In Stock
For 911 SC ModelsAasco Flywheels Features: Direct replacement, Used with OEM clutch or Sachs performance, Lightweight for improved engine flexibility, Designed for street use for performance enthusiasts. -
ARP Engine Block to Transmission Nut & Stud Kit All 1965-Onwards
SKU:19123
3-5 Days
High Tensile M10 Studs inc Starter Motor mounting stud -
Brake & Clutch Pedal Rubber for All 911 Carrera 912 914 & 930 Turbo Models (Each
SKU:2564
In Stock
OEM Porsche Pedal Rubber. Sold Each (1) 2 per car -
Bush for Bottom of Gear Lever 911 912 914 & 930 Turbo 1965-1989
SKU:5099
3-5 Days
OEM Nylon Bush. Loose, sloppy shifting caused by worn shift bushings. Easy replacement to improve gear change. -
Bush for Bottom of Gear Lever 911 912 914 & 930 Turbo 1965-1989
SKU:911.424.139.00
In Stock
OEM Nylon Bush. Loose, sloppy shifting caused by worn shift bushings. Easy replacement to improve gear change. -
Bush for Gear Shift Rod Mount under Gear Lever 911 914 912 & 930 Turbo 1965-1989
SKU:914.424.224.00
In Stock
OEM Bush. Loose, sloppy shifting caused by worn shift bushings. Easy replacement to improve gear change -
Circlip for Clutch Release Bearing All Models 1986-Onwards
SKU:18662
In Stock
Fits the following vehicles 924 Turbo & 924S 944 968 911 930 Turbo 964 993 -
Clutch Cable 911 1969-1977
SKU:2465
In Stock
For Early 901 & 915 Gearbox cars with threads on both ends. -
Clutch Cable 911SC & 3.2 Carrera 1978-86
SKU:2466
In Stock
For All 911's 1978 to 1986 with 915 Gearbox -
-
Clutch Cable Pedal End Clevis Pin Clip All 911 1965-89
SKU:999.166.001.02
In Stock
911 Lock Pin For Clutch Pedal Clevis. Also fits 914 -
Clutch Cable Support on Gearbox All 911 / 915 1974-1985
SKU:5404
3-5 Days
This is no longer available from Porsche, For All 1974-1986. For All 911 2.4 2.7 3.0 & 3.2L with 915 Gearbox. -
Clutch Cable V End Block for clutch Lever adjustment 911 1965-1977 (Cheese)
SKU:15249
In Stock
Clutch Cable V End Block for clutch Lever adjustment 911 1965-1977 Also Fits 914 Clutch Cable -
Clutch Centre Plate Disc for All 911 ( 915 ) Gearboxes 1973-1986
SKU:915.116.011.22
3-5 Days
OEM Sachs part for all 915 gearbox cars upto 1986 -
-
-
-
-
Clutch Kit 911 2.0L 1965-1970 ( 901 Gearbox )
SKU:5206
3-5 Days
For very early Push type Clutch on all 2.0L cars pre 1970 -
Clutch Kit 911 3.2 Carrera G50 Hydraulic Clutch Gearbox Cars 1986-1989
SKU:2459
In Stock
For 911 3.2L Carrera Models 1986 to 1989 with G50 Gearboxes.. Original Sachs kit, contains Cover ( pressure plate ), center disc & release bearing. -
Clutch Kit 911/ 930 Turbo 1989 ( 5 Speed ) Only
SKU:2461
3-5 Days
For 5 speed Turbo Models 1989 Only -
Clutch Kit 911/ 930 Turbo 3.0L & 3.3L Models 1974-1988 ( All 4 Speed cars )
SKU:2460
In Stock
For All 4 speed 911 Turbo Models upto 1988 -
Clutch Master Cylinder 911 G50 Gearbox 1987-89
SKU:2477
In Stock
For All Late 3.2 Carrera & 930 Turbo -
Clutch Omega Helper Spring 911 / 915 Gearbox 1978-1986
SKU:2467
In Stock
Is your clutch pedal hard to depress, the problem could be broken clutch helper spring. Its all too common for this spring, located on the clutch arm at the transmission, to break and make your clutch pedal stiff. New spring will solve the problem. -
Clutch Plate Centre plate Disc 911 2.2l Only 1970-1972
SKU:911.116.011.07
3-5 Days
OEM Sachs part for early dog leg 901 gearbox cars. -
-
Clutch Release Bearing All Models 1987-Onwards inc G50 Turbo GT3 RS & Club Sprt
SKU:1374
In Stock
OEM Sachs Bearing -
Clutch Release Bearing Guide Tube 3.2 Carrera G50 964 993 996 997 Turbo & GT3
SKU:950.116.813.06
In Stock
Guide Tube for all G50 Derived Manual Gearboxes 1987-2012 -
-
CV Boot Kit 928 911 930 G50 964 993 986 987 Boxster Cayman 996 997 Turbo & GT3RS
SKU:1377
In Stock
OEM CV Boot & Clips. All cars from 1986 -Onwards. Priced each ( 4 per car ) -
CV Boot Kits 911 912 & 914 All 1965-1986 ( 901 & 915 Gearbox cars )
SKU:2473
In Stock
OEM CV Boot Kit. Also use on G50 Outer Pot Joint ( 4 per car ) sold Each. 1965 -86 -
CV Drive shaft Bolt G50 3.2 & 964 carrera 2 & All 993 996 997 Boxster & Cayman
SKU:5227
3-5 Days
OEM Porsche CV Bolt for all G50 & late models cars -
CV Drive Shaft Bolts 930 Turbo 964 Turbo & All 928 models 1974-1995
SKU:900.067.123.01
In Stock
OEM Part. Sold Each (1) 12 or 24 per car -
CV Joint 4 Bolt 911 1969-1975 Only
SKU:2469
In Stock
OEM. For All Early 911's with 4 Bolt CV Joint with 2x Dowel locator Holes. -
CV Joint 6 Bolt Type for All 911 / SC & Carrera 915 Gearbox 1976-1986
SKU:2470
In Stock
For all 915 gearbox Models 1976 to 1986 inc 2.7, 3.0SC & early 3.2 Carrera with 915 Gearbox. -
CV Joint Boot with Thick Metal Mounting Flange All 911 912 & 914 1965-1985
SKU:19001
In Stock
OEM part. Note Dose not come with gasket. -
CV Joint Gasket for 930 Turbo & 928 Drive shafts 1974-1986 ( Each )
SKU:930.332.297.00
In Stock
OEM Porsche. Cork construction. Sold Each (4 per car) -
CV Joint Gasket for All 6 Bolt Drive sghafts 911Carrera SC 1976-1986 ( Each )
SKU:923.332.297.00
In Stock
OEM Porsche. Cork construction. Sold Each (4 per car) -
CV Joint Inner 911 3.2 Carrera G50 930 Turbo 964 C2 All 993 Carrera 2/4 1986-On
SKU:2471
In Stock
OEM German Inner joint for G50 Gearbox Carrera Models Note. Not 964 C4 -
CV Joint Rear Drive Shaft Bolt 911/ 915 SC & 3.2 Carrera 964 C4 All 924 944 968
SKU:00149
In Stock
OEM CV Bolt sold Each (6 per CV joint / 24 per car) -
-
Drive shaft 911 6 Bolt 1976-1986 915 Gearbox ( Inc 2x CV joints )
SKU:5207
In Stock
OEM Drive shaft complete with Cv joints. For 911 2.7 & 3.0 & 3.2 Carrera 915 Gearbox Models 1976-1986. For Turbo & 3.2 Carrera G50 cars Please call. -
Drive Shaft CV Joint Gasket 911 All 1965-1976 ( for 4 Bolt CV Joibnts )
SKU:2885
In Stock
OEM Gasket -
Engine & Gearbox Mounting 911 & 914 1965-89
SKU:5208
In Stock
OEM Engine & Gearbox Cross Member Mount. Fits all 911 cars inc 914 models 1965 -1989 -
Flywheel 911 / 901 / 915 Gearbox 1969-77 (6 Bolt Crank)
SKU:6001
3-5 Days
For Most early 911's with 901 & 915 Gearbox. 6 bolt Crank 1969 -77 Inc Carrera3 -
Flywheel 911 3.2 Carrera G50 Gearbox 1987-1989
SKU:5512
In Stock
For Later 3.2 Carrera Models with G50 Gearbox 1987 -89 Only -
Flywheel 911 3.2 Carrera with 915 Gearbox 1984-1986
SKU:1297
In Stock
For Early 3.2 Carrera Models with the 915 Gearbox 1984 -89 Only (Not G50) -
Flywheel 911SC 3.0L 1978-1983 ( For 9 Bolt Crankshaft )
SKU:2464
In Stock
For all 9 Bolt Crank engines 1978 -1983 -
Flywheel 930 / 965 Turbo 1988-1994 5 Speed Gearbox cars Only
SKU:7345
3-5 Days
Porsche 930 & 965 Turbo 3.3L & 3.6L cars 1988 -1994 ( 5 Speed G50 Gearbox ) -
Flywheel 930 Turbo 1974-1988 ( for all 4 Speed Cars )
SKU:7344
3-5 Days
Porsche 930 Turbo 3.0L / 3.3L 1974 -1988 All 4 Speed Gearbox cars -
Flywheel Bolt 911 914 & 930 3.0L Turbo 1965-1977
SKU:911.102.171.00
In Stock
OEM Flywheel Bolt for all 6 bolt Cranks 1956 -1977 Sold Each. -
Flywheel Bolt 911 930 Turbo 924S 944 & Turbo 968 964 993 996 / 997 GT3 1978-2012
SKU:7584
In Stock
OEM Single Mass Flywheel Bolt. Sold Each 9 per car ( M10x1.25x20mm ) Inc Club Sport, RS & GT3 Cup Models -
Flywheel Early 911 / 901 Gearbox 1965-68
SKU:7343
3-5 Days
For Early 2.0 ltr 911 Models 1965 to 1968. 6 Bolt (Also fits 914) Special Order only. Please allow 14 -21 Days for Delivery -
-
Guide Tube for Clutch Release Bearing 915 Gearbox 1972-1983
SKU:915.116.087.03
In Stock
For 5 Speed 915 Cable Clutch Gearbox 1972 -1983 -
Guide Tube for Clutch Release Bearing 915 Gearbox 1984-86
SKU:915.116.087.04
In Stock
Guide Tube for 915 Cable Clutch 3.2 Carrera -
-
Lightweight aluminium Flywheel 911 1970-1977 6 Bolt FW
SKU:106403.12
3-5 Days
For 911 2.2 / 2.4 / 2.7 ModelsAasco Flywheels Features: Direct replacement, Used with OEM clutch or Sachs performance, Lightweight for improved engine flexibility, Designed for street use for performance enthusiasts. -
M10 Flang Nut For Suspension All Models 1965-Onwards
SKU:999.076.053.01
In Stock
OEM Porsche Flange Nut For All Suspension, Engine, Chassis & Gearbox applications -
Omega Clutch Helper Spring Heavy Duty 930 Turbo 1978-88
SKU:930.116.064.09
3-5 Days
Helper Spring for Clutch 1978 -89 -
Porsche 911 / 915 5 Speed Gearbox Gasket Set All 1972-1986 ( Not Turbo )
SKU:2474
In Stock
For All 911 Models with 915 gearbox 1971 to 1986 -
Race Performance Clutch Plate 3.2 G50 964 993 RS 930 944 996 & 997 Turbo & GT3
SKU:930.116.014.02
In Stock
Performance Sprung Clutch Drive Plate. Uprated for All standard & Turbo Applications. Ideal for Road & Race. 240mm Diameter. Standard Fit for; 924 & 944 Turbo, 911 3.2L G50 Carrera, 930 Turbo 3.0L & 3.3L, 964 & 993 RS, & 996 / 997 GT3 RS. Can also be used with Single Mass Flywheels on all; 968, 964, 964 Turbo, 993 & 996 / 997 Turbo Models 1974 -2012 -
Rear Gear Linkage Nylon Poly Bush Kit (2) for All 911 & 930 Turbo 1965-1989
SKU:2135
In Stock
Improves Gear selection & reduces play at lever end also. -
Sachs Clutch Kit All 911 2.4L 2.7L 3.0L SC 3.2L Carrera (915 Gear box) 1972-1986
SKU:2458
In Stock
OE Sachs 3 piece Kit, Inc Cover ( pressure plate ), Center disc & Release Bearing. All 915 Gear Boxses. -
Sachs High Performance Organic Clutch Kit All models Upto-1998 + GT3 & Turbo -12
SKU:5806
3-5 Days
Sport driving demands the best products. Sachs have developed Power Clutch, a heavy duty organic clutch kit system with street manners & racetrack brawn. Features increased torque capacity. Pressure plates are engineered with increased clamping force & the driving disc incorporate linings with increased coefficient of friction. Kit includes Disc, Pressure Plate and Release Bearing. Note. Please use the Model Year & Model Drop down boxes in checkout when ordering. Note. Not for 996 or 997 Carrera based models. -
Sachs Performance Clutch Disc 911 964 968 993 996 997 GT3 & 944 Turbo 1986-2012
SKU:17055
3-5 Days
This Sachs Performance clutch disc replaces the factory clutch plate. Uprated RS type, ideal for track days and high Horse power cars. Size 240mm x 23 Spline Note. for All G50 Gearboxes & also 944 Turbo & 968 / Club Sport -
-
Short Shift Kit 911 72-86 ( 915 Gearbox )
SKU:2479
In Stock
Shortens the shift throw by 30%. Made from heat-treated alloy steel, the shift extension is attached to the original gear shift lever and shift knob. 911's with 915 gearbox 1973-1986 -
Spigot Bearing 911 912 & 914 1965-1977 ( 6 Bolt Crank)
SKU:901.102.025.01
3-5 Days
All Early 911 & 914 1965 -1977 -
Spigot Bearing 911SC 3.2 Carrera & 930 Turbo 1978-89
SKU:930.102.042.00
In Stock
3 Hole Flange Type All Later cars 78 -89 -
Starter Ring Gear 3.2 Carrera G50 964 & 993 RS 996 & 997 GT3 RS & Turbo single M
SKU:7346
In Stock
OEM Ring Gear for Late 3.2 Carrera G50 Gearbox 1987-89 and 964 Carrera 4 1989 Only. Will also fit 964/993RS & 996/997 GT3 Club Sport / RS & Turbo with single Mass Fly Wheel -
Starter Ring Gear 911 with 901 / 915 Gearbox 1969-86
SKU:7347
In Stock
Fits 911 ( 901 & 915 Box) inc Early 3.2 Carrera / 930 Turbo & 914 1969-86 -
