Turbosmart Turbo Performance Products

TurboSmart BOV recirculation valves for Porsche 997 Turbo & GT2

Turbosmart Kompact Series valves have been specifically designed to suit the Porsche 997 Turbo's, unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 2 bar boost handling capability if requited. Designed as a bolt-on replacement for the factory valves these will provides better boost response and greater boost handling capability & longevity.

Kit Includes; Model specific valve, Banjo Nipples, Mounting screws, Spring clamps & installation software

Price:
238.80 / 305.66 Inc. VAT
199.00 / 254.72 Exc. VAT
Convert: (guide only) $ | other
Quantity

TurboSmart BOV 50/50 Recirc / Vent to Air Diverter valves for Porsche 997 Turbo & GT2

A fixed 50/50 vent to air valve, the Turbosmart Dual Port BOV's have been specifically designed to suit Porsche 997 Turbo & GT2. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 2 bar boost handling capability if requited. The 50/50 design allows the existing vacuum system to operate & allows the excess air to vent as an exhaust. Note; the 50/50 valves will require minor adaptation to the rear inner plastic wheel arch liners for clearance. Also Note the vent to air design will give off a notable sound when driven on roads. The 50/50 will provides better boost response and greater boost handling capability & longevity.

Kit Includes; Model specific valve, Banjo Nipples, Mounting screws, Spring clamps & installation software

Price:
349.20 / 446.98 Inc. VAT
291.00 / 372.48 Exc. VAT
Convert: (guide only) $ | other
Quantity

TurboSmart Billet Waste gate actuators for 993 Turbo & GT2 1995 to 1998

Porsche 993 & 996 Wastegate Actuators has its waste gate valves attached onto the side of the turbine housing. The wastegate valve is controlled by an actuator which is a vacuum diaphragm design. The Turbosmart actuators are made from high quality materials which can withstand high stresses and temperatures for prolonged periods of time. They feature fluoro silicone diaphragms with nomex reinforcement to withstand high working pressures and high temperature. These providing better turbo response and greater sensitivity when managing boost pressures, designed as a direct bolt-on replacement for the factory part, the actuator is easy to install and requires no special tools or fabrication.


Sold as a pair, these Billet actuators have a normal working pressure of 0.7 to 1.2 bar


Price:
499.20 / 638.98 Inc. VAT
416.00 / 532.48 Exc. VAT
Convert: (guide only) $ | other
Quantity

TurboSmart Billet Waste gate actuators for 996 Turbo & GT2 2000 to 2005

Porsche 993 & 996 Wastegate Actuators has its waste gate valves attached onto the side of the turbine housing. The wastegate valve is controlled by an actuator which is a vacuum diaphragm design. The Turbosmart actuators are made from high quality materials which can withstand high stresses and temperatures for prolonged periods of time. They feature fluoro silicone diaphragms with nomex reinforcement to withstand high working pressures and high temperature. These providing better turbo response and greater sensitivity when managing boost pressures, designed as a direct bolt-on replacement for the factory part, the actuator is easy to install and requires no special tools or fabrication.


Sold as a pair, these Billet actuators have a normal working pressure of 0.7 to 1.2 bar

Price:
499.20 / 638.98 Inc. VAT
416.00 / 532.48 Exc. VAT
Convert: (guide only) $ | other
Quantity

TurboSmart 911 / 930, 964, 965 & 924 Turbo External waste gate 1974 to 1994

The most common reason for investing in a new wastegate is for better control of the boost and consequently the power output of your engine. Additionally, most tuners will recommend an aftermarket wastegate for any engine producing 400hp or more, as running high boost through a factory wastegate can overpower the actuator spring, limiting maximum boost level. Our external wastegates feature bigger inlet and outlet ports, higher pressure springs and bigger actuator diaphragms to effectively control of boost pressure. High temperature resistance, they are designed and manufactured using the latest technologies. Turbosmart wastegates are market leaders in their sectors. The new Ultra-Gate is ideal for road and racing applications designed with minimum size and maximum flow in mind, the new Ultra-Gate is smaller and lighter than the other models and features Turbosmart's unique locking collar design for quicker spring changes if needed. Stainless steel valve is standard.

Price:
594.00 / 760.32 Inc. VAT
495.00 / 633.60 Exc. VAT
Convert: (guide only) $ | other
Quantity